SAM PuttLab Operating Manual - Science & Motion Golf
SAM PuttLab Operating Manual - Science & Motion Golf
SAM PuttLab Operating Manual - Science & Motion Golf
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
Hardware and Software Installation<br />
2. Determine triplet<br />
position on the shaft<br />
The triplet has to be<br />
positioned at a distance of<br />
0.25m (10 inches) from the<br />
lower edge of the club head.<br />
The triplet calibration sheet<br />
helps you measure the<br />
distance.<br />
0.25m / 10 inch<br />
Triplet<br />
Calibration<br />
Sheet<br />
Triplet<br />
3. Release triplet nuts<br />
The triplet can be mounted<br />
to putters with different<br />
shaft diameters by adjusting<br />
the two triplet nuts.<br />
To attach the triplet, please<br />
release both nuts completely<br />
first.<br />
Triplet Nuts<br />
Triplet<br />
4. Flap fastener around<br />
shaft<br />
Shaft<br />
Place the triplet on the shaft<br />
like shown in step 2.<br />
Notch<br />
A<br />
B<br />
Then flap (A) the black<br />
fastener around the shaft<br />
and flap (B) the second<br />
screw into the fasteners<br />
notch.<br />
Fastener<br />
Page 20