TC63i AT Command Set

TC63i AT Command Set
5.3 AT^SPIC
5.3 AT^SPIC Display PIN counter
The AT^SPIC command can be used to find out whether the ME is waiting for a password and, if so, how many
attempts are left to enter the password.
The execute command returns the number of attempts still available for entering the currently required password,
for example the PIN, PUK, PH-SIM PUK etc.
The read command AT^SPIC? indicates which password the number of attempts stated by the execute command
actually refers to. Also, the write command may be used to query the counter for a specific password: It
indicates the number of attempts still available for entering the password identified by , for example
the PIN, PIN2, PH-SIM PIN etc.
To check whether or not you need to enter a password use the read commands AT+CPIN?, AT+CPIN2? and
AT^SPIC?. If the response to AT+CPIN? is "READY" the counter of the execute command AT^SPIC relates to
PIN2. See last example. If the responses to AT+CPIN? and AT+CPIN2? both read "READY", no password is
currently required, and the referrer of the execute command AT^SPIC is explicitly undefined.
Syntax
Test Command
AT^SPIC=?
Response(s)
OK
Read Command
AT^SPIC?
Response(s)
^SPIC:
OK
Exec Command
AT^SPIC
Response(s)
^SPIC:
OK
Write Command
AT^SPIC=
Response(s)
^SPIC:
OK
ERROR
+CME ERROR:
PIN ASC0 ASC1 USB MUX1 MUX2 MUX3 Charge Last
- + + + + + + - + -
Parameter Description
(num)
Number of attempts left to enter the currently required password. This number will be counted down after each
failure.
TC63i_ATC_V01.100 Page 129 of 547 11/10/08
Confidential / Released