TC63i AT Command Set

TC63i AT Command Set
10.1 AT^SICS
^SICS: 0, "conType", ""
^SICS: 1, "conType", "CSD"
^SICS: 1, "alphabet", "0"
^SICS: 1, "user", ""
^SICS: 1, "passwd", "*****"
^SICS: 1, "authMode", "PAP"
^SICS: 1, "inactTO", "0"
^SICS: 1, "calledNum", ""
^SICS: 1, "dataRate", "1"
^SICS: 1, "dataType", "1"
^SICS: 2, "conType", ""
^SICS: 3, "conType", ""
^SICS: 4, "conType", ""
^SICS: 5, "conType", ""
OK
Profile with 0 is still empty.
The new CSD profile just created is indicated with all
related parameters set to their default.
Character set determined with AT+CSCS applies
when string parameters are input with AT^SICS.
No user name set.
Password masked with asteriks.
Authentication protocol PAP is assumed as default.
No inactivity timeout set.
No destination set.
Data rate set to 9.6 kbaud.
Remote device is analog, e.g. an analog modem.
Profile with 2 is still empty.
Profile with 3 is still empty.
Profile with 4 is still empty.
Profile with 5 is still empty.
10.1.2 Example: GPRS connection profile
at^sics=0,conType,GPRS0
OK
AT^SICS=0,inactTO,"0"
OK
AT^SICS=0,dns1,"193.254.160.1"
OK
AT^SICS=0,authMode,"PAP"
OK
AT^SICS=0,passwd,t-d1
OK
AT^SICS=0,apn,"internet.t-d1.de"
OK
Select connection type GPRS0.
Inactivitiy timeout = 0 (default).
IP address of Primary DNS server.
Authentication protocol PAP (default).
Password for GPRS services provided by the German
operator T-D1.
APN to access the GPRS services provided by the
German operator T-D1.
TC63i_ATC_V01.100 Page 257 of 547 11/10/08
Confidential / Released