TC63i AT Command Set

TC63i AT Command Set
3.3 AT^SIND
3.3 AT^SIND Extended Indicator Control
Designed for extended event indicator control AT^SIND
• offers greater flexibility than the standard command AT+CIND,
• offers several extra indicators,
• can show the current status of all indicators supported by AT+CIND and AT^SIND,
• can be used to register or deregister the indicators of both commands,
• displays all indicator event reports via "+CIEV" URCs.
Presentation mode of the generated URCs is controlled via AT+CMER.
The AT^SIND read command provides a list of all indicators supported by AT+CIND and AT^SIND. Each indicator
is represented with its registration mode and current value.
The AT^SIND write command can be used to select a single indicator in order to modify its registration and to
view the current value.
Syntax
Test Command
AT^SIND=?
Response(s)
^SIND: (, list of supported s)[, (, list of supported s)[,
...]], (list of supported s)
OK
Read Command
AT^SIND?
Response(s)
^SIND: , ,
[^SIND: , , ]
...
In case of ="eons"
^SIND: "eons", , ,
In case of ="nitz"
^SIND: "nitz", , , ,
In case of ="lsta"
^SIND: "lsta", ,
OK
ERROR
+CME ERROR:
Write Command
AT^SIND=,
Response(s)
^SIND: , ,
In case of: ="eons" and =2
^SIND: "eons", , , ,
In case of: ="nitz" and =2
^SIND: "nitz", , , ,
OK
TC63i_ATC_V01.100 Page 83 of 547 11/10/08
Confidential / Released