TC63i AT Command Set

TC63i AT Command Set
11.7 AT+CGEQMIN
(num)
0 conversational
1 streaming
2 interactive
3 background
[4] subscribed value
(num)
This parameter indicates the maximum number of kbits/s delivered to UMTS (up-link traffic) at a SAP. As an
example a bitrate of 32kbit/s would be specified as 32 (e.g. AT+CGEQMIN=...,32,...).
[0] subscribed value
1...63
64...128 (value needs to be divisible by 8 without remainder)
256
512
(num)
This parameter indicates the maximum number of kbits/s delivered by UMTS (down-link traffic) at a SAP. As an
example a bitrate of 32kbit/s would be specified as 32 (e.g. AT+CGEQMIN=...,32,...).
[0] subscribed value
1...63
64...256 (value needs to be divisible by 8 without remainder)
512
(num)
This parameter indicates the guaranteed number of kbits/s delivered to UMTS (up-link traffic) at a SAP (provided
that there is data to deliver). As an example a bitrate of 32kbit/s would be specified as 32 (e.g.
AT+CGEQMIN=...,32,...).
[0] subscribed value
1...63
64...128 (value needs to be divisible by 8 without remainder)
(num)
This parameter indicates the guaranteed number of kbits/s delivered by UMTS (down-link traffic) at a SAP (provided
that there is data to deliver). As an example a bitrate of 32kbit/s would be specified as 32 (e.g.
AT+CGEQMIN=...,32,...).
[0] subscribed value
1...63
64...256 (value needs to be divisible by 8 without remainder)
(num)
This parameter indicates whether the UMTS bearer shall provide in-sequence SDU delivery or not.
0 no
1 yes
[2] subscribed value
TC63i_ATC_V01.100 Page 321 of 547 11/10/08
Confidential / Released