28.04.2015 Views

TC63i AT Command Set

TC63i AT Command Set

TC63i AT Command Set

SHOW MORE
SHOW LESS

You also want an ePaper? Increase the reach of your titles

YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.

<strong>TC63i</strong> <strong>AT</strong> <strong>Command</strong> <strong>Set</strong><br />

<br />

17.10 <strong>AT</strong>^SPBG<br />

output but terminated with a "+CME ERROR: invalid index".<br />

Note: The maximum value of is 255, regardless of the phonebook type and its range indicated by<br />

the parameter . If a value greater than 255 is used the query returns no phonebook records, and only<br />

"+CME ERROR: invalid index" is shown.<br />

(num)<br />

Is a display of the "real" of the entry required?<br />

[0] Do not show an entry's "real" location number. Parameter will not<br />

be displayed.<br />

1 Show the "real" location number as parameter at the end of each<br />

entry.<br />

(str)<br />

String type phone number in format specified by .<br />

The number parameter may be an empty string.<br />

(num)<br />

Type of address octet, which defines the used type of number (ton) and the numbering plan identification (npi).<br />

Please consider that for types other than 129 or 145 dialing from phonebook with <strong>AT</strong>D> is, depending<br />

on the network, not always possible (refer to GSM 04.08 subclause 10.5.4.7 for details). See also of<br />

<strong>AT</strong>+CPBW.<br />

Possible values are:<br />

145 Dialing string includes international access code character '+'<br />

161 National number. Network support of this type is optional.<br />

209 Dialing string has been saved as ASCII string and includes nondigit<br />

characters other than "*", "#" or "+". Note that phonebook entries saved<br />

with this type cannot be dialed.<br />

255 Dialing string is a command to control a Supplementary Service,<br />

i.e. "*", "#" codes are contained. Network support of this type is optional.<br />

129 Otherwise<br />

(str)(+CSCS)<br />

Text assigned to the phone number. The maximum length for this parameter is given in test command response<br />

.<br />

(num)<br />

Value indicating the number of used locations in selected memory storage.<br />

(num)<br />

The location within phonebook memory at which the corresponding entry is located.<br />

This location may be used for other commands (e.g. <strong>AT</strong>+CPBR or <strong>AT</strong>D>)<br />

(num)<br />

Maximum length of phone number for "normal" locations. Depending on the storage, a limited number of locations<br />

with extended memory is available per phonebook. Please refer to <strong>AT</strong> command <strong>AT</strong>+CPBW for detail.<br />

<strong>TC63i</strong>_<strong>AT</strong>C_V01.100 Page 451 of 547 11/10/08<br />

Confidential / Released

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!