TC63i AT Command Set

TC63i AT Command Set
15.2 AT^SRSM
Example
The following example shows how to establish an RSA connection.
AT+CMEE=2
OK
AT+CREG=1
OK
AT^SSET=1
OK
AT^SCKS=1
OK
AT^SM20=0
OK
AT^SRSA?
OK
AT^SRSA=2,2,3,0
^SRSA:0
OK
^SRSA:2,2,0
^SRSA:2,2,1
^SCKS:0
+CREG:0
^SCKS:1
AT+CPIN?
+CPIN: SIM PIN
OK
+CME ERROR: SIM blocked
+CME ERROR: SIM busy
AT+CPIN=1234
OK
+CREG:2
+CREG:1
^SSIM READY
ATD491777777777777
OK
Switch on verbose error messages.
Switch on network registration URC.
Switch on SIM data ready URC.
Switch on SIM status URC.
Switch on immediate indication of OK response after
dialing with ATD.
Does the ME support RSA and is a SAP connection
established?
Initialization of RSA mode using XSAP data format.
URC indicating SAP client start without ongoing connection.
ME now starts sending SAP message
CONNECTION_REQ on dedicated RSA channel.
If an SAP server has responded and offers its SIM:
URC indicating a connection with SAP server.
URC indicating the loss of (local) SIM.
URC indicating the deregistration from network
because of loss of SIM.
URC indicating the activation of remote SIM.
ME now starts reading data from the SIM.
Does the new SIM require a PIN?
Request PIN status.
PIN needs to be entered.
or
or
Retry if the ME returns these messages.
URC indicating network registration.
URC indicating that SIM data is read out.
Make a call.
TC63i_ATC_V01.100 Page 424 of 547 11/10/08
Confidential / Released