28.04.2015 Views

TC63i AT Command Set

TC63i AT Command Set

TC63i AT Command Set

SHOW MORE
SHOW LESS

You also want an ePaper? Increase the reach of your titles

YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.

<strong>TC63i</strong> <strong>AT</strong> <strong>Command</strong> <strong>Set</strong><br />

<br />

15.3 Related <strong>AT</strong> <strong>Command</strong>s<br />

• After installing the USB Bluetooth dongle and the "PlugFree" driver software, the Bluetooth profiles are accessible<br />

via their own virtual COM port.<br />

• If the WinMux driver has been installed another three virtual channels (mapped to additional COM ports) are<br />

available. The physical Multiplexer COM port is connected to the <strong>TC63i</strong>.<br />

• Start the Bluetooth connection using the driver provided by the USB Bluetooth dongle.<br />

• Through "ComBridge", one virtual COM port supplied by "WinMux" is connected to the SAP COM port of<br />

"PlugFree". This establishes a direct communication link between the <strong>TC63i</strong> and the other mobile. However,<br />

take into account that <strong>AT</strong> commands can still be entered on the remaining multiplexer channels of the <strong>TC63i</strong>.<br />

• Select the "ComBridge" SAP filter.<br />

• Press the "ComBridge-Start" button to connect both mobiles.<br />

• Start the SAP client using the <strong>AT</strong> command "<strong>AT</strong>^SRSA=2,2,3,1", if multiplexer channel 3 is used.<br />

15.3.3 Serial Interface Scenario (XSAP)<br />

This example describes the connection of two mobiles. It is recommended that the instructions be followed in the<br />

order that they are presented:<br />

• Install two WinMux drivers on the PC and connect each ME to the physical port of a Multiplexer.<br />

• Connect the PC application "ComBridge" to one virtual COM port of each Multiplexer. This establishes a communication<br />

link between the two mobiles. Bear in mind that <strong>AT</strong> commands can still be issued on both mobiles<br />

using the remaining serial channels.<br />

• Select the "ComBridge" XSAP filter.<br />

• Open the XSAP "Config Filter" menu and deactivate the "Startup - Send Initialization" and the "Shutdown -<br />

Switch back to local SIM" tags. However, the appropriate device IDs need to be entered in the "Startup"<br />

frame.<br />

• Press the "ComBridge - start" button to connect both MEs.<br />

• Start the SAP client via <strong>AT</strong> command "<strong>AT</strong>^SRSA=2,2,3,0", if multiplexer channel 3 is used.<br />

• Start the SAP server via <strong>AT</strong> command "<strong>AT</strong>^SRSA=1,1,3,0", if multiplexer channel 3 is used.<br />

<strong>TC63i</strong>_<strong>AT</strong>C_V01.100 Page 427 of 547 11/10/08<br />

Confidential / Released

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!