AZ-225 Install Manual

More documents

Recommendations

Info

Copyright © Array Technologies, Inc. All rights reserved. Wattsun is a trademark of Array Technologies, Inc. Sixteen, BP 150 watt modules mounted on a Wattsun AZ-225 Tracker Drive. AZ-225 Installation Guide: Revision 5 OCT 2008 2
WARNING TO ELECTRICIAN OR INSTALLER ♦ Please read this instruction manual completely. ♦ If you are unfamiliar with NEC compliant solar electric installation, then consult with the dealer that supplied your tracker. They should have the skill and expertise to supply you with the necessary wiring diagrams and the appropriate connection wire, grounding equipment, junction boxes and fusing. ♦ Failure to ground the array structure, including each module frame, the aluminum tracker frame, the drive head assembly and the pipe mast may make the tracker susceptible to damage by lightning. ♦ Do not rely on the pipe mast to act as a ground rod. It is not a reliable substitute for a properly installed ground rod. ♦ Please send in the Wattsun Tracker Warranty Card. Array Technologies does not share any of the information provided on the warranty card. ♦ Please leave this manual for the tracker owner(s). It is their property and will help resolve any potential problems. ♦ Please provide the following information for the owner: Serial Numbers: __________________________________ Serial Number located on the controller ______________________________________ Serial Number located on the drive assembly Tracker Type: Dual-Axis Tracker is Standard on AZ-225 Controller is powered from: Battery Bank Power Supplu System Type: Off-Grid/Remote Home Grid-Intertie - no battery backup Grid-Intertie - battery backup Water Pumping Other _____________________ PV Array: PV System Voltage is ______ VDC Number of Modules: __________ Module Manufacturer: ____________ Module Model: ____________ Mounting Pole Height above the Ground is: ________ FT 3
Page 1: INSTALLATION GUIDE Guide for your A
Page 5 and 6: Section 1 Installation of Tracker P
Page 7 and 8: VERY IMPORTANT! “OUT OF THE BOX
Page 9 and 10: AZ-225 HORIZONTAL TORQUE TUBE INSTA
Page 11 and 12: Section 4 Install the Module Suppor
Page 13 and 14: Tools Required: Frame Assembly and
Page 15 and 16: Step 6 Pull the module rail u-bolts
Page 17 and 18: Step 12 Continue populating the arr
Page 19 and 20: Y OUR TRACKER CONTROLLER IS PREINST
Page 21 and 22: Terminal Controller Output Motor 1
Page 23 and 24: AZIMUTH MOTOR: TERMINAL STRIP WIRIN
Page 25 and 26: Section 6 Power Connection to the E
Page 27 and 28: 7.3) POWER OPTION #1: POWER CONTROL
Page 29 and 30: CONTROLLER DIAGRAM, COMPONENTS, SWI
Page 31 and 32: VIEW OF A DUAL-AXIS CONTROLLER with
Page 33 and 34: Section 10 Manual Control Option FU
Page 35 and 36: Section 12 Suggested Methods for Gr
Page 37 and 38: FIG 2: TYPICAL GROUNDING OF A TRACK
Page 39: Section 13 Array Technologies, Inc.

AZ-225 Install Manual

Create successful ePaper yourself

Delete template?

Save as template?