AZ-225 Install Manual
AZ-225 Install Manual
AZ-225 Install Manual
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
Section<br />
11<br />
Periodic Maintenance<br />
12) PERIODIC MAINTENANCE<br />
♦ Maintenance should be performed at least once a year. More often if your tracker is installed in severe<br />
weather areas.<br />
♦ Inspect all the tracker hardware and the module bolts for tightness. Tighten all nuts and bolts that need it.<br />
♦ Inspect all wires for abrasion and gently tug on them to make sure that they are secure.<br />
♦ Each of the four grease zerks should receive 4-6 pumps of lithium-base general-purpose chassis grease from<br />
a grease gun.<br />
♦ Elevation Actuator: Spray the inner tube (telescoping part) of the linear actuator with a lubricating rust inhibitor.<br />
(We use LPS-3)<br />
NOTE:<br />
YOUR <strong>AZ</strong>-<strong>225</strong> GEAR DIVE MAY HAVE THE 4 th GREASE ZERK LOCATED ON THE BOTTOM OF THE GEAR<br />
HOUSING RATHER THAN THE TOP AS SHOWN IN THE PICTURE.<br />
34
Change language