Start with Moeller - Klockner Moeller Parts

B
Motor Protection
Current Sensors ZEV-XSW-25 ZEV-XSW-65 ZEV-XSW-145 ZEV-XSW-820
General
Standards IEC/EN 60947, VDE 0660, UL, CSA
Climatic proofing
Ambient temperature
Damp heat, constant, to IEC 60068-2-78; Damp heat, cyclic, to IEC 60068-2-30
Open [°C] -25…60 °C
-25…60 °C
-25…60 °C
-25…60 °C
[°F] -13…140 °F
-13…140 °F
-13…140 °F
-13…140 °F
Enclosed [°C] -25…40 °C
-25…40 °C
-25…40 °C
-25…40 °C
[°F] -13…104 °F
-13…104 °F
-13…104 °F
-13…104 °F
Storage [°C] -40…80 °C
-40…80 °C
-40…80 °C
-40…80 °C
[°F] -40…176 °F
-40…176 °F
-40…176 °F
-40…176 °F
Temperature compensation Continuous
Mounting position As required
Weight [kg] 0.21 0.37 0.45 0.30
Mechanical shock resistance half-sinusoidal shock 10ms [g] 15 15 15 15
Degree of protection IP20 IP20 IP20 IP20
Protection against direct contact when actuated from front
Main Contacts
Finger and back-of-hand proof
Rated impulse withstand voltage Uimp [V AC] ➊ ➊ ➊ 8000
Overvoltage category / pollution degree ➊ ➊ ➊ III/3
Rated insulation voltage Ui [V AC] ➊ ➊ ➊ 1000
Rated operational voltage Ue [V AC] ➊ ➊ ➊ 1000
Safe isolation to VDE 0106 Part 101 and Part 101/A1
Between busbar and sensor [V AC] – – – 500
Overload relay setting range [A] 1 – 25 3 – 65 10 – 145 40 – 820
Short-circuit protection rating maximum fuse With overload relay in conjunction with a transformer as required for the contactor
Push-through opening Ø [mm] 6 13 21 110
➊ Dependant on the current wiring that is used.
Technical Data
Current Sensors
B24 moellerNA.com STARTER-CAT-USA-1206
For Immediate Delivery call KMParts.com at (866) 595-9616