Start with Moeller - Klockner Moeller Parts

The full-load current values listed in the table below are for motors
running at usual speeds, with normal torque characteristics at 1.15
service factor. This table is a guide only. The actual full load motor
amps for your motor may be different than the average values
listed here. Always use the actual motor current listed on the motor
nameplate when purchasing motor control and protection products.
Motor
Rating (HP)
115 V
AC Induction Motor – Full Load Current (A)
Single Phase Three Phase
200 V 230 V 200 V 230 V 460 V 575 V
1/6 4.4 2.5 2.2 – – – –
1/4 5.8 3.3 2.9 – – – –
1/3 7.2 4.1 3.6 – – – –
1/2 9.8 5.6 4.9 2.3 2.0 1.0 0.8
3/4 13.8 7.9 6.9 3.2 2.8 1.4 1.1
1 16 9.2 8 4.1 3.6 1.8 1.4
1-1/2 20 11.5 10 6.0 5.2 2.6 2.1
2 24 13.8 12 7.8 6.8 3.4 2.7
3 34 19.6 17 11.0 9.6 4.8 3.9
5 56 32.2 28 17.5 15.2 7.6 6.1
7-1/2 80 46 40 25.3 22 11 9
10 100 57.5 50 32.2 28 14 11
15 – – – 48.3 42 21 17
20 – – – 62.1 54 27 22
25 – – – 78.2 68 34 27
30 – – – 92.0 80 40 32
40 – – – 119.6 104 52 41
50 – – – 149.5 130 65 52
60 – – – 177.1 154 77 62
75 – – – 220.8 192 96 77
100 – – – 285.2 248 124 99
125 – – – 358.8 312 156 125
150 – – – 414 360 180 144
200 – – – 552 480 240 192
300 – – – 825 720 360 288
350 – – – 963 840 420 336
400 – – – 1100 960 480 384
450 – – – 1238 1080 540 432
500 – – – 1375 1200 600 480
600 – – – 1650 1440 720 576
700 – – – 1925 1680 840 672
800 – – – 2200 1920 960 768
900 – – – 2475 2160 1080 864
1000 – – – 2750 2400 1200 960
NOTE: This chart was developed from Table 430-148 & 430-150 of the NEC, Table 52.2 of UL standard 508 and
from the Canadian Electrical Code (CEC), Part 1, table 44 and 45.
STARTER-CAT-USA-1206 moellerNA.com A7
For Immediate Delivery call KMParts.com at (866) 595-9616
Motor Current Rating Chart
According to NEC and CEC
A
Contactors