Start with Moeller - Klockner Moeller Parts

DIL M Low Range
Moeller’s DIL M contactor series includes a completely
NEW offering in the lower 7 to 150A range. Consisting
of four frame sizes, this range is the newest and most
modern of any control manufacturer!
Compact
design for BOTH
currents
Conventional contactors
designed for DC control
applications can be up
to 30% larger than their
AC counterparts. Not
anymore! Unique to Moeller’s DIL M contactors, AC and
DC units are the same frame size throughout the entire
range. The reduced size means smaller DC panels than
ever before. This also means you can now design one
panel for either AC or DC control, without having to plan
for a larger DC contactor.
Easy to assemble
Coil terminals are located on the front of the new contactors
to simplify wiring. Both
two and four-pole auxiliary contacts
snap on without tools. Units
40A and above accept both side
and top mount auxiliaries for increased
flexibility. In addition, devices up to 32A include
built-in auxiliary contacts for increased economy with
no additional space requirement.
Contacts designed for safety
Auxiliary contact blocks for new DIL M contactors have
positively guided contacts for added safety in control
circuits. Positively guided auxiliary contacts insure that,
throughout the life of the contactor, NO and NC contacts
will never close simultaneously…even if a contact
welds. In addition, DIL M contactors to 65A have “mirror”
contacts, which ensure that all auxiliary contacts
(whether built-in or add-on) function correctly in relation
to the power contacts.
Special advantages of going DC
In addition to sharing the same frame size as AC contactors,
DC units of 17A and above also feature electronic
drives that dramatically reduce pick-up and sealing consumption.
These drives produce several benefits:
• less heat is generated, eliminating the
need for a fan
• smaller control transformers are required
• contactors up to DIL M32 can be directly
actuated from PLCs, eliminating the need for
a coupling relay
These benefits lower your cost by consuming less power,
eliminating additional components, and permitting
higher packing density in the panel.
DC units to 150A also carry a built-in high-speed suppressor
circuit, eliminating the need for purchasing and
installing a separate external suppressor. Again, lower
total cost and smaller panel space result.
For additional safety and convenience, Moeller’s DIL M
DC contactors feature an expanded voltage tolerance,
beyond that specified by IEC/EN 60947. This accommodates
a range of -30% to +20% for DIL M contactors
17A and above. It is one of the largest voltage tolerance
ranges of any control manufacturer.
For Immediate Delivery call KMParts.com at (866) 595-9616
+20%
-30%
A3
A
Contactors