International Catalogue

Injection non-cracked concrete with RG MI
The fixing system with internal threaded anchor
for non-cracked concrete
Chemical fixings
Column bases
Pumps
VERSIONS
▪ zinc-plated steel
▪ stainless steel
APPROVALS
ADVANTAGES
▪ The system comprising internal
threaded anchor RG MI and one of
the injection mortars FIS V, FIS VS,
FIS VW or FIS VT for non-cracked
concrete can be individually selected
based on requirements, thus allowing
for a wide range of applications.
▪ The internal threaded anchor RG MI
allows for surface flush removal and
reuse of the fixing point, and therefore
offers the best possible flexibility.
▪ The metric internal thread allows
for the use of standard screws or
threaded rods for the ideal adaptation
to suit the intended use.
BUILDING MATERIALS
Approved for:
▪ Concrete C20/25 to C50/60, noncracked
Also suitable for:
▪ Concrete C12/15, non-cracked
APPLICATIONS
▪ Removable fixings
▪ Temporary fixings, e.g. for machines
▪ Scaffold anchoring
FUNCTIONING
▪ The system can be used with any of
the following injection mortars: FIS V,
FIS VS, FIS VW and FIS VT.
▪ The injection system is suitable for prepositioned
installation when combined
with the internal threaded anchor
RG MI.
▪ The mortar is extruded bubble free
from the drill hole base.
▪ The mortar bonds the entire surface of
the internal threaded anchor with the
drill hole wall and seals the drill hole.
▪ The internal threaded anchor is set
manually, by lightly rotating it until it
reaches the drill hole base.
FOR USE WITH
FIS V mortar FIS VW mortar FIS VS mortar FIS VT mortar
see page 71 see page 75 see page 79 see page 83
103