International Catalogue

Can System FCS
Chemical fixings
The epoxy resin for repair work
Filling cracks
Reconstructing corners and edges
ADVANTAGES
▪ The FCS based on epoxy resin has a
high bond strength and a low shrinkage
value. This guarantees a high
performance and opens up a wide
range of applications.
▪ The two product variants, FCS Liquid
(low viscosity = liquid) and FCS (high
viscosity = paste-like), allow for use
both in horizontal situations and on
walls and ceilings. Therefore, there
is always the right product for every
occasion.
BUILDING MATERIALS
Suitable for:
▪ Concrete
APPLICATIONS
▪ Filling holes and cracks in concrete
and similar surfaces
▪ Reconstructing split corners and
edges
FUNCTIONING
▪ The resin and hardener are stored in
two separate containers.
▪ The hardener is added to the resin and
mixed thoroughly until the material is
the same colour throughout.
▪ Note: The quality of the mixing of
components and the proper filling of
the holes (without air pockets) has an
effect on the load-bearing capacity of
the system!
▪ FCS Liquid can be poured into holes
or cracks, or applied using a brush.
▪ FCS can be applied with a palette
knife.
▪ Once mixed, the material can be
used until the maximum open time is
reached.
146