International Catalogue

Injection mortar FIS EM
The powerful injection mortar for rebar connections and
cracked concrete
Chemical fixings
Rail fastenings
Underwater applications
BUILDING MATERIALS
Approved for anchorings in:
▪ Concrete C20/25 to C50/60,
cracked and non-cracked
Approved for rebar connections in:
▪ Concrete C12/15 to C50/60
Also suitable for:
▪ Natural stone with dense structure
APPROVALS
ADVANTAGES
▪ Thanks to its high bond strength,
FIS EM achieves a very high load
level for safe use in cracked and noncracked
concrete.
▪ FIS EM is also suitable for diamonddrilled
drill holes, thus allowing for
greater flexibility on the construction
site.
▪ The low mortar shrinkage allows for
a maximum applied load, including
in the case of large threaded rod
diameters.
▪ The pure epoxy resin can also be used
underwater, thus allowing for use in
extreme conditions.
▪ The high approved temperature resistance
of -40°C to +72°C allows for a
stable load level, even when subjected
to increased temperature demands.
▪ FIS EM has extended open times and
is therefore particularly suitable for
series installation and rebar connections.
APPLICATIONS
Injection mortar for use in cracked
and non-cracked concrete with:
▪ Threaded rods FIS A, see page 89
▪ Internal threaded anchor RG MI, see
page 94
For rebar connections with:
▪ Concrete steel bars, see page 123
▪ Rebar anchor FRA, see page 123
Ideal for:
▪ Diamond-drilled drill holes
▪ Underwater applications
FUNCTIONING
▪ FIS EM is a 2-component injection
system based on epoxy resin.
▪ Resin and hardener are stored in two
separate chambers and are not mixed
and activated until extrusion through
the static mixer.
▪ The professional injection cartridges
are quick and easy to use with the
fischer dispensers.
▪ Partially used cartridges can be
reused, simply by changing the static
mixer.
▪ Related accessories for the various
applications can be found on pages
69 (cracked concrete) and 125 (rebar
connection).
67