International Catalogue

Universal frame fixing FUR
ACCESSORIES
Cover cap ADT
Colour Cap Fits safety screw with seat ITX-Star recess Sales unit
Item Art.-No. [Ø mm] [pcs]
ADT 15 W 060326 white 15 40 100
ADT 15 DB 060329 dark brown 15 40 100
ADT 18 W 060334 white 18 40 100
ADT 18 DB 060337 dark brown 18 40 100
ACCESSORIES
Washer U stainless steel A2
External Hole Ø Thickness Fits anchor Sales unit
d
S
Item Art.-No. [mm] [Ø mm] [mm] [pcs]
U 11,5 x 21 x 1,5 DIN 522 A2 010026 21 11,5 1,5 SXR 10, FUR 10, SXS 10 500
LOADS
Universal frame fixing FUR 4)
Highest permissible loads 1) for a single anchor for multiple fixings of non-structural applications in normal concrete ≥ C12/15 resp. ≥
B15 5) . For the design the complete approval Z-21.2-1204 has to be considered.
Cracked or Non-cracked concrete
Type Min. embedment depth Min. member thickness Permissible load Min. spacing Min. edge distance
Frame fixings / Stand-off installation
h nom (h v ) h (d) F perm
3)
s min (a) 2) c min (a r ) 2)
[mm] [mm] [kN] [mm] [mm]
FUR 8 70 100 1,0 50 50
FUR 10 70 120 1,6 50 50
FUR 14 70 120 1,8 50 60
1)
The required safety factors as regulated in the approval are considered.
2)
Minimum possible axial spacings resp. edge distance while reducing the permissible load.
3)
Valid for tensile load, shear load and oblique load under any angle. Restrictions for permanently
acting tensile loads see approval. For combinations of tensile loads, shear loads, bending
moments see approval table 4.
4)
gvz and A4. For exterior applications of galvanised screws measures against incoming humidity
have to be taken.
5)
Permissible loads in the weather shell of triple-skin outer wall panels as well as in no-fines
lightweight concrete see approval.
235