International Catalogue

Rebar connections
Professional rebar connections
Chemical fixings
Rebar connections
Rebar connections
BUILDING MATERIALS
Approved for:
▪ Concrete C12/15 to C50/60,
cracked and non-cracked
APPROVALS
ADVANTAGES
▪ The injection mortars FIS V / VS
allow for rebar connections from
Ø8 to 28 mm, whilst injection mortar
FIS EM allows for rebar connections
up to Ø40 mm to be carried out. This
offers maximum flexibility.
▪ FIS EM also allows for the execution of
rebar connections in diamond-drilled
holes.
▪ The FRA with connecting thread in
stainless steel A4 fully utilises the
load-bearing capacity of the concrete.
This means that extremely high tensile
loads can be introduced into the base
material.
▪ Accessories in line with building site
requirements, such as injection adapters
and extension tubes, ensure rapid
progress.
▪ The FIS rebar case contains all of the
individual components required, thus
ensuring a convenient installation.
APPLICATIONS
▪ Post-installed concrete steel bars, e.g.
for overlap connections, end anchorings,
starter bars, needlings etc.
▪ Rebar anchor FRA
FUNCTIONING
▪ Anchoring as with cast-in reinforcement
bars in line with Eurocode 2 and
DIN 1045-1.
▪ The mortar is extruded bubble free
into the drill hole using the injection
adapter. The geometry causes a
build-up of pressure in the drill hole,
which pushes the injection adapter
and extension tube automatically out
of the drill hole.
▪ The mortar bonds the entire surface
of the reinforcement bar with the drill
hole wall.
▪ A special certification is necessary for
installation according to approval in
Germany. The fischer Academy offers
the relevant training courses.
FOR USE WITH
FIS EM mortar FIS V mortar FIS VS mortar
see page 67 see page 71 see page 79
123