International Catalogue

Concrete screw FBS
High performance steel anchors
The screw solution for multiple fixings
Ventilation systems
VERSIONS
▪ zinc-plated steel
BUILDING MATERIALS
Approved for:
▪ Concrete C20/25 to C50/60,
cracked, for multiple fixings of nonstructural
applications
Also suitable for:
▪ Concrete C12/15
▪ Natural stone with dense structure
Strip lighting
APPROVALS
ADVANTAGES
▪ The concrete screw has been
approved for the multiple fixing of
non-load-bearing systems, and as
such is ideal for fixing pipelines, cable
conduits etc.
▪ The FBS can be set and installed in
one go, thereby saving on installation
time.
▪ When combined with a tangential
impact wrench, the screw principle
allows for a quick and easy installation.
▪ A range of head shapes allows for the
fixing of wide-ranging attachments,
and for the ideal adaptation to suit the
intended use.
APPLICATIONS
▪ Pipes
▪ Ventilation systems
▪ Sprinkler systems
▪ Cable conduits
▪ Wire hangers
▪ Punched tapes
▪ Ceilings
▪ Temporary internal fixings
FUNCTIONING
▪ The FBS type SK and type P are
suitable for push-through installation;
whilst the FBS type M8 and type M8/
M10 I are suitable for pre-positioned
installation.
▪ When the concrete screw is screwed
into the drill hole, the thread taps into
the concrete with a positive fit.
▪ Please note the power output information
to ensure that the best results
are achieved with a tangential impact
wrench (incl. nuts fitting tangential
impact wrenches) (see table).
▪ Available head shapes for flexible
design solutions:
Countersunk head (type SK - for
surface flush fixings), panhead (type
P), bushing with internal thread (type
M8/M10-I for suspensions), threaded
bolts (type M8).
182