International Catalogue

UMV multicone dynamic bonded anchor
Chemical fixings
The capsule system for the anchoring of dynamic loads
Slewing cranes
Guide rails for elevators
VERSIONS
▪ zinc-plated steel
APPROVALS
BUILDING MATERIALS
Approved for:
▪ Concrete C20/25 to C50/60,
cracked and non-cracked
ADVANTAGES
▪ The bushing fills the annular gap in
the fixture and, in combination with
the anchor rod UMV-A dyn, ensures
an even load distribution. This allows
for the bearing of dynamic alternating
loads.
▪ The cone shape of the UMV-A dyn
anchor rod ensures a controlled
expansion under dynamic stress, thus
allowing for use in cracked concrete.
▪ The pre-portioned resin capsule
ensures a quick and easy installation
on the construction site, and helps to
avoid errors.
▪ The glass particles of the capsule body
rough up the drill hole wall during the
setting process, and improve the bond
between the anchor rod and concrete.
APPLICATIONS
▪ Slewing cranes
▪ Mobile portal and ceiling cranes
▪ Guide rails for elevators
▪ Antennas and transmitter masts
▪ Production robots
FUNCTIONING
▪ The bonded anchor suitable for tensile
zones consists of the UMV multicone
dynamic anchor rod and the UMV
multicone resin capsule.
▪ UMV multicone dynamic is suitable
for pre-positioned and push-through
installation.
▪ During setting (rotating/hitting), the
tip of the anchor rod destroys the
capsule in the drill hole, and mixes and
activates the mortar.
▪ The mortar bonds the entire surface of
the anchor rod with the drill hole wall
and seals the drill hole.
▪ Once the fixture has been positioned,
the installation sleeve is used to drive
the bushing over the anchor rod.
132