International Catalogue

Highbond anchor dynamic FHB dyn
Chemical fixings
The performance class amongst dynamic anchors
Production robots
Tunnel ventilators
VERSIONS
▪ zinc-plated steel
▪ high corrosion resistant steel
APPROVALS
ADVANTAGES
▪ During the setting process, the injection
mortar FIS HB fills the annular
gap in the fixture, and ensures optimum
load distribution. This allows for
the absorption of dynamic alternating
loads.
▪ The cone shape of the FHB-A dyn
anchor rod ensures a controlled
expansion under dynamic stress, thus
allowing for use in cracked concrete.
▪ The anchor rod FHB-A dyn is also
available made from highly corrosionresistant
steel. This makes it suitable
for use in aggressive atmospheres, for
example in tunnels.
▪ The Highbond anchor dynamic system
can achieve even greater shear loads
thanks to the additional sleeve of the
anchor rod FHB-A dyn V, and therefore
provides an increased level of safety.
BUILDING MATERIALS
Approved for:
▪ Concrete C20/25 to C50/60,
cracked and non-cracked
APPLICATIONS
▪ Slewing cranes
▪ Mobile portal and ceiling cranes
▪ Guide rails for elevators
▪ Tunnel ventilators (jet fans)
▪ Bridges for traffic signs
▪ Antennas and transmitter masts
▪ Industrial robots
FUNCTIONING
▪ The injection system suitable for
tensile zones consists of the Highbond
dynamic anchor rod FHB-A dyn and
the injection mortar FIS HB.
▪ FHB dyn is approved for pre-positioned
and push-through installation.
▪ Extruding the mortar causes the two
components to be mixed and activated
in the static mixer.
▪ The mortar bonds the entire surface of
the anchor rod with the drill hole wall
and seals the drill hole.
▪ The centring sleeve centres the anchor
in the fixture, thus ensuring a safe load
application.
▪ The lock nut prevents the nut from
becoming loose.
128