International Catalogue

Bolt anchor FAZ II GS
High performance steel anchors
Economic fixing for cracked concrete with large washer
Column bases with long holes
VERSIONS
▪ zinc-plated steel
▪ stainless steel
BUILDING MATERIALS
Approved for:
▪ Concrete C20/25 to C50/60,
cracked and non-cracked
Also suitable for:
▪ Concrete C12/15
▪ Natural stone with dense structure
Steel sub-structures
APPROVALS
ADVANTAGES
▪ The FAZ II GS with 8, 10 and 12 mm
diameters are suitable for fixing steel
fixtures with long holes thanks to the
special washer, and help to reduce
installation effort.
▪ The significantly larger outer diameter
of the washers for FAZ II 16 GS
ensures a larger supporting surface,
and as such allows for use in wood
construction.
▪ The pre-fitted washer ensures a fast
installation.
▪ Furthermore, the FAZ II GS bolt anchor
offers all of the benefits of the FAZ II.
APPLICATIONS
▪ Anchor plates with long holes
▪ Façade sub-structures with long holes
▪ Wood constructions
FUNCTIONING
▪ The FAZ II is suitable for pre-positioned
and push-through installation; also
suitable for stand-off installation under
certain conditions.
▪ Prior to installation, place the hexagon
nut in the optimal position (the drive-in
pin projects by approx. 3 mm out of
the hexagon nut).
▪ When applying the torque, the cone
bolt is pulled into the expansion clip
and expands it against the drill hole
wall.
▪ The head embossing offers a simple
control of the anchoring.
▪ In the case of series installation, we
recommend using the FABS bolt
anchor setting tool.
158