pdf (2140k) - Adcon Engineering Co

MICRO-SCREEN ® SystemsMetal Box ControllersMICRO-SCREEN Metal Box Controller Kits Model Numbering SchemeMICRO-SCREEN systems may be purchased as a kit which contains a controller, an emitter and receiver ofequal length and beam spacing, standard mounting brackets, and a pair of interconnecting cables. See pages309 and 310 for a listing of possible kit models.The resultant model number in this example is: USK2DE24123C5YP2, which includes the followingcomponents:• Metal box controller model USCD-2T3E: with fixed blanking, EDM and 2 N.O. FSDs & 1 N.C. Aux.Example:MICRO-SCREENKit• Emitter and receiver models USE2412YP2 and USR2412YP2: 610 mm (24") high defined area,31.8 mm (1.25") minimum object detection, yellow housing, and pigtail QD connector• Two cables model QDU-525C: 8 m (25') longUS K 2 D E 24 12 3 C5 Y P2Sensor Cable Termination:I = Integral 25' cableBlank = Integral QD connectorP2 = Pigtail QD connectorOptical Safety SystemsFixed-Beam Blanking:Blank = Without2 = WithSensor Finish:Y = Yellow polyester paintN = Nickel platedSupply Voltage:D = 115/230V acT = 24V dcOptions:E = With ExternalDevice MonitoringBlank = WithoutLight Screen Height(in inches)Beams per foot:24 = Standard series12 = V-SeriesQuick-Disconnect Cables*:C4 = 2 x 15'C5 = 2 x 25'C6 = 1 x 15' plus 1 x 25'Blank = Integral 25' cablesNumber of Outputs:Blank = 2 N.O. FSDs3 = 2 N.O. FSDs and 1 N.C. Aux.Output Type:Blank = TripL = Latch*NOTE: Other cable lengthcombinations are possible.Contact factory.Banner Engineering Corp. • Minneapolis, MN U.S.A. • bannerengineering.com • Tel: 763.544.316481