pdf (2140k) - Adcon Engineering Co

MINI-SCREEN ® SystemsAccessoriesMirrorModelSSM-100-SSSM-150-SSSM-250-SSSM-375-SSSM-475-S100 mm (3.0")150 mm (5.9")250 mm(9.8")375 mm (14.8”)SSM-550-S 550 mm (21.7")SSM-675-SSSM-825-SSSM-975-SSSM-1175-SSSM-1275-SSSM-1475-SSSM-1675-SSSM-1900-SSSM-S Series Stainless Steel Corner Mirrors*• Designed for use in industrial environments, where glass is prohibited• Stainless steel reflective surface provides 60% reflectivity for the guarding of multi-sided applicationswith one emitter/receiver pair• Robust construction, two mounting brackets and hardware includedReflective AreaY475 mm (18.7")675 mm (26.6")825 mm (32.5")975 mm (38.4")1175 mm (46.3")1275 mm (50.2")1475 mm (58.1")1675 mm (65.9")1900 mm (74.8")Mounting HeightL1211 mm (8.3")261 mm (10.3")361 mm (14.2")486 mm (19.1")586 mm (23.1")661 mm (26.0")786 mm (31.0")936 mm (36.9")1086 mm (42.8")1286 mm (50.6")1386 mm (54.6")1586 mm (62.5")1786 mm (70.3")2011 mm (79.2")* EZA-MBK-2 adaptor bracket is required, if used with MSA Series Stand, see page 67.Overall HeightL2178 mm (7.0")228 mm (9.0")328 mm (12.9")453 mm (17.8")553 mm (21.8")628 mm (24.7")753 mm (29.6")903 mm (35.6")1053 mm (41.5")1253 mm (49.3")1353 mm (53.5")1553 mm (61.1")1753 mm (69.0")1978 mm (77.9")M6 x 19 mm screw(4 supplied)M5 x 10 mm screw(4 supplied)L1L2101.2 mm(3.98")100 mm(3.94")115 mm(4.53")Note: Brackets may be inverted from the positionsshown above, decreasing dimension L1 by58 mm (2.3")YOptical Safety SystemsModel Sensor Length Lens Shield LengthMSHDS24 610 mm (24") 26"MSHDS32 813 mm (32") 34"MSHDS40 1016 mm (40") 42"MSHDS48 1219 mm (48") 50"MSHDS56 1422 mm (56") 58"MSHDS64 1626 mm (64") 66"MSHDS72 1829 mm (72") 74"NOTE: When shields are installed on both the emitter and receiver, excess gain is reduced by 36 percent andmaximum operating range is reduced by 20 percent.Lens ShieldModel NumberHeavy Duty MINI-SCREEN Polycarbonate Lens ShieldsMINI-SCREEN Polycarbonate Lens ShieldsSensor LengthLens ShieldLengthMSS4 102 mm (4")5.4"MSS8 204 mm (8")9.4"MSS12 306 mm (12")13.4"MSS16 406 mm (16")17.4"MSS20 508 mm (20")21.4"MSS24 610 mm (24")25.3"MSS28 711 mm (28")29.3"MSS32 813 mm (32")33.3"MSS36 914 mm (36")37.3"MSS40 1016 mm (40")41.3"MSS44 1118 mm (44")45.3"MSS48 1219 mm (48")49.3"NOTE: When shields are installed on both the emitter and receiver, excess gain is reduced by 36 percent andmaximum operating range is reduced by 20 percent.Banner Engineering Corp. • Minneapolis, MN U.S.A. • bannerengineering.com • Tel: 763.544.3164133