pdf (2140k) - Adcon Engineering Co

MINI-SCREEN ® SystemsEmitters and ReceiversMINI-SCREEN ® Standard Range Emitters & ReceiversRange to 9 m (30') • 19 mm (0.75") minimum object sensitivity• Light screens available in 12 lengths: from 114 mm (4.5") to 1219 mm (48")• Available with either black anodized or yellow polyester painted finishOptical Safety Systems• Compact design blends well with existing machinery• Each sensor includes swivel brackets for ease of alignment, plus anti-vibrationmounts• All sensors use convenient quick-disconnect (QD) cables (pages 128 and 129);a 305 mm (12") quick-disconnect pigtail cable is an option (see note below andpage 130)Standard Range MINI-SCREEN Sensor Models*Black AnodizedFinishMSE424MSR424MSE824MSR824MSE1224MSR1224MSE1624MSR1624MSE2024MSR2024MSE2424MSR2424MSE2824MSR2824MSE3224MSR3224MSE3624MSR3624MSE4024MSR4024MSE4424MSR4424MSE4824MSR4824Yellow PaintedFinishMSE424YMSR424YMSE824YMSR824YMSE1224YMSR1224YMSE1624YMSR1624YMSE2024YMSR2024YMSE2424YMSR2424YMSE2824YMSR2824YMSE3224YMSR3224YMSE3624YMSR3624YMSE4024YMSR4024YMSE4424YMSR4424YMSE4824YMSR4824YDefinedArea114 mm (4.5")215 mm (8.5")305 mm (12")406 mm (16")508 mm (20")610 mm (24")711 mm (28")813 mm (32")914 mm (36")1016 mm (40")1118 mm (44")1219 mm (48")Minimum Object SensitivityResponse TimeAmbient Light ImmunityEmitter ElementsStatus IndicatorsApplication NotesMINI-SCREEN Standard Range Sensor SpecificationsEmitter/Receiver SeparationEmitter and ReceiverEnclosureOptical PerformanceOperating Conditions150 mm (6") minimum to 9 m (30')19.1 mm (0.75") with no floating blanking in use31.8 mm (1.25") with one-beam floating blanking ON44.5 mm (1.75") with two-beam floating blanking ONSee controller specifications.>10,000 lux at 5° angle of incidenceInfrared LEDs; 880 nm peak emissionEmitter: Green LED for power ONReceiver: Red, yellow and green status indicatorswith same function as those on control box (seeindividual Controller Specifications). Yellow LEDalso indicates alignment.Size: See dimension information on page 108.Material: Aluminum extrusion with black anodizedor yellow polyester painted finish; acryliclens cover. Mounting hardware supplied.Rating: IP65; NEMA 4, 13This system meets the ± 2.5° requirements of IEC61496-2, section 5.2.9 (Type 4)Temperature: 0° to +50°C (32° to 122°F)Relative humidity: 95% maximum (non-condensing)Use only Banner cables, which use a “twisted pair”for noise immunity on RS 485 data communicationlines. Use of other cables can result in “nuisance”lockouts. See pages 128 and 129.Pigtail Quick Disconnect OptionAny emitter or receiver may be ordered with a 305 mm (12") cable pigtail terminated in the 5-pin male mini-style quick-disconnect connector. The same matingquick-disconnect cables, as listed on pages 128 and 129, are used (ordered separately or included in kit). To specify the pigtail QD option, add suffix “P” to themodel number of the emitter or receiver, for example: MSE1624P.*For example, MSE424, where “E” is emitter, MSR424, where “R” is receiver.106Banner Engineering Corp. • Minneapolis, MN U.S.A. • bannerengineering.com • Tel: 763.544.3164