pdf (2140k) - Adcon Engineering Co

MINI-SCREEN ® SystemsAccessoriesMSA Series Tubular Enclosures*• FDA-grade polycarbonate tubing and Delrin ® end caps• Stainless steel mounting components• Brackets and fasteners included• Ideal for high-pressure washdown applications• NEMA 4X, IP67• 12 models available to accommodate MINI-SCREEN ® Standard & Long-Range sensors 4" to 48" long• Max. operating range is reduced by 50% when using these enclosuresFront ViewY16.8 mm(0.66")L4Optical Safety SystemsModelsMSA-TE-4MSA-TE-8MSA-TE-12HousingLengthDefined AreaL1 L2 L3 X Y338 mm(13.3")439 mm(17.3")541 mm(21.3")312 mm(12.3")414 mm(16.3")516 mm(20.3")279 mm(11.0")381 mm(15.0")483 mm(19.0")L4170 mm(6.7")272 mm(10.7")373 mm(14.7")28 mm(1.1")28 mm(1.1")30 mm(1.2")114 mm(4.5")215 mm(8.5")305 mm(12")L1L2L3XMSA-TE-16MSA-TE-20643 mm(25.3")744 mm(29.3")617 mm(24.3")719 mm(28.3")584 mm(23.0")686 mm(27.0")475 mm(18.7")577 mm(22.7")30 mm(1.2")30 mm(1.2")406 mm(16")508 mm(20")Side View86.4 mm(3.40")MSA-TE-24846 mm(33.3")820 mm(32.3")787 mm(31.0")678 mm(26.7")30 mm(1.2")610 mm(24")MSA-TE-28947 mm(37.3")922 mm(36.3")889 mm(35.0")780 mm(30.7")33 mm(1.3")711 mm(28")MSA-TE-321049 mm(41.3")1024 mm(40.3")991 mm(39.0")879 mm(34.6")33 mm(1.3")813 mm(32")MSA-TE-361151 mm(45.3")1125 mm(44.3")1092 mm(43.0")980 mm(38.6")33 mm(1.3")914 mm(36")MSA-TE-401252 mm(49.3")1227 mm(48.3")1194 mm(47.0")1082 mm(42.6")33 mm(1.3")1016 mm(40")MSA-TE-441354 mm(53.3")1328 mm(52.3")1295 mm(51.0")1184 mm(46.6")33 mm(1.3")1118 mm(44")MSA-TE-481455 mm(57.3")1430 mm(56.3")1397 mm(55.0")1285 mm(50.6")33 mm(1.3")1219 mm(48")Delrin ® is a registered trademark of Dupont* EZA-MBK-2 adaptor bracket is required, if used with MSA Series Stand, see page 67.MSA Series Stands (Base is included)*Stand ModelMSA-S24-1MSA-S42-1MSA-S66-1MSA-S84-1UseableStand Height19"37"61"79"OverallStand Height24"42"66"84"UsableStandHeightPole40 mm(1.58") Square(4) M10 Bolt* Available without a base by adding the suffix “NB” to model number. For example, MSA-S24-1NB.See data sheet p/n 43687 for more information on MSA Series Stands.Base6.4 mm (0.25")134 Banner Engineering Corp. • Minneapolis, MN U.S.A. • bannerengineering.com • Tel: 763.544.3164