pdf (2140k) - Adcon Engineering Co

MINI-SCREEN ® SystemsEmitters and ReceiversMINI-SCREEN Heavy Duty Sensor Dimensions(standard end-cap brackets shown)MINI-SCREEN Heavy Duty SensorEnd Cap Bracket Mounting52 mm(2.0")55 mm(2.1")Optical Safety SystemsY L1 L2 L371 mm(2.8")12.5 mm (0.50")Minimum Bend RadiusModelsMSXLHDE2412YMSXLHDR2412YMSXLHDE3212YMSXLHDR3212YMSXLHDE4012YMSXLHDR4012YMSXLHDE4812YMSXLHDR4812YMSXLHDE5612YMSXLHDR5612YMSXLHDE6412YMSXLHDR6412YMSXLHDE7212YMSXLHDR7212YHousingLengthY625 mm (24.6") 661 mm (26.03")826 mm (32.5") 862 mm (33.9")1029 mm (40.5") 1065 mm (41.9")1229 mm (48.4") 1266 mm (49.8")Enclosure Mounting Length Mounting LengthLength (Brackets Out) (Brackets In)L1 L2 L3694 mm (27.3") 636 mm (25.0")895 mm (35.2")1098 mm (43.2")1299 mm (51.1")836 mm (32.9")1039 mm (40.9")1240 mm (48.8")1433 mm (56.4") 1469 mm (57.8") 1502 mm (59.1") 1443 mm (56.8")1633 mm (64.3") 1670 mm (65.7") 1703 mm (67.0") 1643 mm (64.7")1836 mm (72.3") 1873 mm (73.7") 1906 mm (75.0") 1847 mm (72.7")MINI-SCREEN Heavy Duty SensorSide Bracket MountingEZA-MBK-1 MINI-SCREEN Heavy Duty Sensor Mounting Hardware(supplied with each emitter and receiver)See pages 136 & 137 for additional optional brackets4.2 mm(0.17")25.0 mm(0.98)2x 30.0°2x 60.0°74.2 mm(2.92")40 mm(1.57")C L60.0 mm(2.36)5.0 mm(0.20") 15.0 mm31.5 mm(1.24")15.8 mm(0.62")(0.60")3x 7.0 mm(0.28")C Lø 32.0 mm(1.26")ø 43.0 mm(1.69")4x 5.8 mm(0.23")NOTE: EZA-MBK-2 adaptor bracket is required, if used with MSA Series Stand, see page 67.110 Banner Engineering Corp. • Minneapolis, MN U.S.A. • bannerengineering.com • Tel: 763.544.3164