pdf (2140k) - Adcon Engineering Co

MINI-SCREEN ® SystemsEmitters and ReceiversMINI-SCREEN ® Heavy Duty SensorsRange to 18 m (60') • 38 mm (1.5") minimum object sensitivity• Light screens available in 7 heights: from 610 mm (24") to 1829 mm (72")• Available in yellow polyester painted finish• Designed to provides exceptionally high immunity to ambient light interference• Each sensor includes swivel brackets at each end for ease of alignment, plus amounting channel on either side for increased mounting flexibility• All sensors use convenient quick-disconnect (QD) cables (pages 128 and 129); a305 mm (12") quick-disconnect pigtail cable is an option (see note below andpage 130)Optical Safety SystemsMINI-SCREEN Heavy Duty Sensor Models*Yellow PaintedFinishMSXLHDE2412YMSXLHDR2412YMSXLHDE3212YMSXLHDR3212YMSXLHDE4012YMSXLHDR4012YMSXLHDE4812YMSXLHDR4812YMSXLHDE5612YMSXLHDR5612YMSXLHDE6412YMSXLHDR6412YMSXLHDE7212YMSXLHDR7212YDefinedArea610 mm (24")813 mm (32")1016 mm (40")1219 mm (48")1422 mm (56")1626 mm (64")1829 mm (72")Number ofBeams24324048566472Emitter/Receiver SeparationMinimum Object SensitivityResponse TimeAmbient Light ImmunityEmitter ElementsStatus IndicatorsEmitter and ReceiverEnclosureOptical PerformanceOperating ConditionsApplication NotesMINI-SCREEN Heavy Duty Sensor Specifications150 mm (6") minimum to 18 m (60')38 mm (1.5") with no floating blanking in use62 mm (2.45") with one-beam floating blanking ON89 mm (3.5") with two-beam floating blanking ONSee controller specifications.>10,000 lux at 5° angle of incidenceInfrared LEDs; 880 nm peak emissionEmitter: Green LED for power ONReceiver: Red, yellow and green status indicatorswith same function as those on control box (seeindividual Control Box Specifications). Yellow LEDalso indicates alignment.Size: See dimensions on next page.Material: Aluminum extrusion with black anodizedor yellow polyester painted finish; acryliclens cover. Mounting hardware supplied.Rating: IP65; NEMA 4, 13This system meets the ± 2.5° requirements of IEC61496-2, section 5.2.9 (Type 4)Temperature: 0° to +50°C (32° to 122°F)Relative humidity: 95% maximum (non-condensing)Use only Banner cables, which use a “twisted pair”for noise immunity on RS 485 data communicationlines. Use of other cables can result in “nuisance”lockouts. See pages 128 and 129.Pigtail Quick Disconnect OptionAny emitter or receiver may be ordered with a 305 mm (12") cable pigtail terminated in the 5-pin mini-style quick-disconnect connector. The same mating quickdisconnectcables, as listed on pages 128 and 129, are used (ordered separately or include in kit). To specify the pigtail QD option, add suffix “P” to the modelnumber of the emitter or receiver, for example: MSXLHDE7212YP.*For example, MSXLHDE424, where “E” is emitter, MSXLHDR424, where “R” is receiver.Banner Engineering Corp. • Minneapolis, MN U.S.A. • bannerengineering.com • Tel: 763.544.3164109