pdf (2140k) - Adcon Engineering Co

MICRO-SCREEN ® SystemsAccessoriesMirrorModelSSM-100-SSSM-150-SSSM-250-SSSM-375-SSSM-475-SReflective AreaY100 mm (3.0")150 mm (5.9")250 mm(9.8")375 mm (14.8”)SSM-550-S 550 mm (21.7")SSM-675-SSSM-825-SSSM-975-SSSM-1175-SSSM-1275-SSSM-1475-SSSM-1675-SSSM-1900-SSSM-S Series Stainless Steel Corner Mirrors*• Designed for use in industrial environments• Stainless steel reflective surface provides 60% reflectivity for the guarding of multi-sided applicationswith one emitter/receiver pair• Robust construction, two mounting brackets and hardware included475 mm (18.7")675 mm (26.6")825 mm (32.5")975 mm (38.4")1175 mm (46.3")1275 mm (50.2")1475 mm (58.1")1675 mm (65.9")1900 mm (74.8")Mounting HeightL1211 mm (8.3")261 mm (10.3")361 mm (14.2")486 mm (19.1")586 mm (23.1")661 mm (26.0")786 mm (31.0")936 mm (36.9")1086 mm (42.8")1286 mm (50.6")1386 mm (54.6")1586 mm (62.5")1786 mm (70.3")2011 mm (79.2")* EZA-MBK-2 adaptor bracket is required, if used with MSA Series Stand, see page 67.Overall HeightL2178 mm (7.0")228 mm (9.0")328 mm (12.9")453 mm (17.8")553 mm (21.8")628 mm (24.7")753 mm (29.6")903 mm (35.6")1053 mm (41.5")1253 mm (49.3")1353 mm (53.5")1553 mm (61.1")1753 mm (69.0")1978 mm (77.9")M6 x 19 mm screw(4 supplied)M5 x 10 mm screw(4 supplied)L1L2101.2 mm(3.98")100 mm(3.94")115 mm(4.53")Note: Brackets may be inverted from the positionsshown above, decreasing dimension L1 by58 mm (2.3")YOptical Safety SystemsLens ShieldModel NumberMICRO-SCREEN Polycarbonate Lens ShieldsMICRO-SCREENSensor LengthLens ShieldLengthUSS4 102 mm (4")4.4"USS8 204 mm (8")8.4"USS12 306 mm (12")12.4"USS16 406 mm (16")16.4"USS20 508 mm (20")20.4"USS24 610 mm (24")24.4"USS28 711 mm (28")28.4"USS32 813 mm (32")32.4"USS36 914 mm (36")36.4"USS40 1016 mm (40")40.4"USS44 1118 mm (44")44.4"USS48 1219 mm (48")48.4"USS56 1422 mm (56")56.4"USS64 1626 mm (64")64.4"USS72 1829 mm (72")72.4"NOTE: When shields are installed on both the emitter and receiver, excess gain is reduced by 36 percent andmaximum operating range is reduced by 20 percent.LAT-1 Laser Alignment ToolModelLAT-1USA-LAT-1DescriptionSelf-contained visible-beam laser tool for alignment of any MICRO-SCREENemitter/receiver pair. Includes retroreflective target material and three mounting clipsClip-on retroreflective target for MICRO-SCREENBanner Engineering Corp. • Minneapolis, MN U.S.A. • bannerengineering.com • Tel: 763.544.316497