pdf (2140k) - Adcon Engineering Co

RMINI-SCREEN ® SystemsModificationsModelModificationsCableUsedMINI-SCREEN Controller ModificationsBanner will quote special MULTI-SCREEN Dual Light Screen systems or components, including modifications to sensors and/or controllers. Following are threeexamples of special MULTI-SCREEN controllers.Connectors and FeaturesMUSC-1-50265Base ControllerModel:MUSC-1(see page 122)Added four 5-pinconnectors for emitterand receiverDEC-5..C(see pg 128)Sensor Connectors1 52 4 3Pin # Description1 TR2 COM3 DRAIN4 +12V dc5 TROptical Safety SystemsPresenceSensingDeviceSensorConnectors5-pin QDModelModificationMSCT-2-50277Base ControllerModel:MSCT-2(see page 116)Remote programming of fixed blanking:Controller is wired with a 2 m (6') cable to allow external connection of remote Program/Run switch and Program Set switchMSCD-2-58701Base ControllerModel:MSCD-2(see page 116)Up to 24 fixed blanked beams:Controller is modified to allow fixed blanking of up to 24 beams, versus up to 12 beams for the standard model. This configurationworks only with 914 mm (36") sensors.MSCD-2-50527Base ControllerModel:MSCD-2(see page 116)Up to 32 fixed blanked beams:Controller is modified to allow fixed blanking of up to 32 beams, versus up to 12 beams for the standard model. This configurationworks only with 1219 mm (48") sensors.MSCD-2-51694Base ControllerModel:MSCD-2(see page 116)Programming of fixed blanking using front panel key switch:Controller is supplied with a key switch on the control box door used for programming of fixed blanking. To set blanking, hold keyswitch in “PROGRAM MODE” for 1 /2 to 2 seconds.Banner Engineering Corp. • Minneapolis, MN U.S.A. • bannerengineering.com • Tel: 763.544.3164131