pdf (2140k) - Adcon Engineering Co

MICRO-SCREEN ® SystemsDIN Module ControllersMICRO-SCREEN DIN Module Controller Kits Model Numbering SchemeMICRO-SCREEN systems may be purchased as a kit which contains a controller, an emitter and receiver ofequal length and beam spacing, standard mounting brackets, a pair of interconnecting cables, and a keyedreset switch. See pages 311 to 314 for a listing of possible kit models.The resultant model number in this example is: USDKTE2412C5YP2, which includes the followingcomponents:• DIN module controller model USDINT-1T2E: with trip output, EDM & 2 FSDsExample:MICRO-SCREENKit with DIN-style controllerFixed-Beam Blanking:Blank = Without2 = WithSupply Voltage:T = 24V dcOptions:E = With ExternalDevice MonitoringBlank = WithoutLight Screen Height(in inches)Beams per foot24 = Standard series12 = V-series• Emitter and receiver models USE2412YP2 and USR2412YP2: 610 mm (24") high defined area,31.8 mm (1.25") minimum object detection, yellow housing, and pigtail QD connector• Two cables model QDU-525C: 8 m (25') longUS DK T E 24 12 C5 Y P2Sensor Cable Termination:I = Integral 25' cableBlank = Integral QD connectorP2 = Pigtail QD connectorSensor Finish:Y = Yellow polyester paintN = Nickel platedQuick-Disconnect Cables*:C4 = 2 x 15'C5 = 2 x 25'C6 = 1 x 15' plus 1 x 25'Blank = Integral 25' cablesNumber of outputs:Blank = 2 N.0. FSDs4 = 4 N.0. FSDsOutput Type:Blank = TripL = LatchOptical Safety Systems*NOTE: Other cable lengthcombinations are possible.Contact factory.Banner Engineering Corp. • Minneapolis, MN U.S.A. • bannerengineering.com • Tel: 763.544.316489