pdf (2140k) - Adcon Engineering Co

MICRO-SCREEN ® SystemsAccessoriesOptical Safety SystemsMSM Series Corner Mirrors• Rear-surface glass mirrors rated at 85% efficiency for the guarding of multi-sided applications with oneemitter/receiver pair.• Small and lightweight; two mounting brackets and hardware included.• Once mounted, a unique mirror end cap design allows 360° rotation of the mirror.Reflective Area Mounting HeightModelsYL1MSM4A 165 mm (6.5") 221 mm (8.7")MSM8A 267 mm (10.5") 323 mm (12.7")MSM12A 356 mm (14") 411 mm (16.2")MSM16A 457 mm (18") 513 mm (20.2")MSM20A 559 mm (22") 615 mm (24.2")MSM24A 660 mm (26") 716 mm (28.2")MSM28A 762 mm (30") 818 mm (32.2")MSM32A 864 mm (34") 919 mm (36.2")MSM36A 965 mm (38") 1021 mm (40.2")MSM40A 1067 mm (42") 1123 mm (44.2")MSM44A 1168 mm (46") 1224 mm (48.2")MSM48A 1270 mm (50") 1326 mm (52.2")Overall HeightL2191 mm (7.5")292 mm (11.5")381 mm (15")483 mm (19")584 mm (23")686 mm (27")787 mm (31")889 mm (35")991 mm (39")1092 mm (43")1194 mm (47")1295 mm (51")L153.8 mm(2.12")L272.9 mm(2.87")M4 x 12 mmScrew(8 supplied)Y50.8 mm(2.00")Note: Brackets may be inverted from thepositions shown above, decreasingdimension L1 by 56.9 mm (2.24") andmaximum rotation to ±45°.SSM Series Corner Mirrors*• Rear-surface glass mirrors rated at 85% efficiency for the guarding of multi-sided applications with oneemitter/receiver pair.• Robust construction, two mounting brackets and hardware includedMirrorModelSSM-100SSM-150SSM-250SSM-375SSM-475SSM-550SSM-675SSM-825SSM-975SSM-1175SSM-1275SSM-1475SSM-1675SSM-1900Reflective AreaY100 mm (3.9") 211 mm (8.3")178 mm (7.0")150 mm (5.9") 261 mm (10.3")228 mm (9.0")250 mm (9.8") 361 mm (14.2")328 mm (12.9")375 mm (14.8") 486 mm (19.1")453 mm (17.8")475 mm (18.7") 586 mm (23.1")553 mm (21.8")550 mm (21.7") 661 mm (26.0")628 mm (24.7")675 mm (26.6") 786 mm (31.0")753 mm (29.6")825 mm (32.5") 936 mm (36.9")903 mm (35.6")975 mm (38.4") 1086.4 mm (42.8") 1053 mm (41.5")1175 mm (46.3") 1286.4 mm (50.6") 1253 mm (49.3")1275 mm (50.2") 1386.4 mm (54.6") 1353 mm (53.3")1475 mm (58.1") 1586.4 mm (62.5") 1553 mm (61.1")1675 mm (65.9") 1786.4 mm (70.3") 1753 mm (69.0")1900 mm (74.8")Mounting HeightL11945 mm (76.7”)Overall HeightL21978 mm (77.9")M6 x 19 mm screw(4 supplied)M5 x 10 mm screw(4 supplied)L1L2101.2 mm(3.98")100 mm(3.94")115 mm(4.53")Note: Brackets may be inverted from thepositions shown above, decreasingdimension L1 by 58 mm (2.3”)Y* EZA-MBK-2 adaptor bracket is required, if used with MSA Series Stand, see page 67.96 Banner Engineering Corp. • Minneapolis, MN U.S.A. • bannerengineering.com • Tel: 763.544.3164