10.07.2015 Views

Expert Oracle Exadata - Parent Directory

Expert Oracle Exadata - Parent Directory

Expert Oracle Exadata - Parent Directory

SHOW MORE
SHOW LESS

You also want an ePaper? Increase the reach of your titles

YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.

CHAPTER 8 CONFIGURING EXADATA Note: OneCommand does not allow you to modify the character set parameters. So the default databasecreated will use the AL32UTF8 database character set, and AL16UTF16 national character set. After theinstallation is complete, you may choose to drop the default database and create your own databases that meetthe specific requirements of your environment. Keep in mind that <strong>Oracle</strong> recommends using Unicode for all newdatabase implementations.Network SettingsThe final set of configuration parameters is where you specify the network settings for <strong>Exadata</strong>.OneCommand supports the configuration of up to four networks, identified as NET0 through NET3.NET0 and NET1 are required and are used for the management network and client access network,respectively. NET2 and NET3 are optional networks you may choose to configure if needed. Table 8-3shows all the network settings used to configure <strong>Exadata</strong>.Table 8-3. Network SettingsNetwork SettingDomain nameIP address of the name server(s)IP address of the Network TimeProtocol (NTP) server(s)Management Network (NET0)Starting IP addressManagement Network (NET0)Subnet maskManagement Network (NET0)Gateway IP addressClient Access Network (NET1)Starting IP addressClient Access Network (NET1)Subnet maskDescriptionYour network domain name. For example: ourcompany.comThe IP address of one or more of your network name servers.The IP address of one or more NTP servers for server timesynchronization.The starting IP address for the management network. IPaddresses for all management network end-points will derivesequentially from this IP address. This network must beseparate from all other networks on <strong>Exadata</strong>.The subnet mask for the management network.The IP address of the gateway for the management network.The client access network is configured on the computenodes. It is the interface used by the database SCAN listeners.Client applications connect to the database through the NET1interface. This network must be separate from all othernetworks on <strong>Exadata</strong>.The subnet mask for the Client Access Network.249

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!