MP Research Catalog - Biopac

50MP150 Starter SystemMP Systems for DataNEWMP150 Starter SystemMP150 and MP100 Data AcquistionUnit SpecificationsAnalog InputsNumber of Channels: 16Input Voltage Range: ±10VA/D Resolution:16 BitsAccuracy (% of FSR): ±0.003Input impedance:1.0 MΩAnalog OutputsNumber of Channels: 2Output Voltage Range: ±10VD/A Resolution:MP150: 16 bits, MP100: 12 BitsAccuracy (% of FSR): MP150: ±0.003, MP100: ±0.02Output Drive Current: ±5mA (max)Output Impedance:100ΩThe new MP150 offers Ethernet-ready data acquisition and analysis. Recordmultiple channels with differing sample rates. Record at speeds up to 400kHz(aggregate). Place one or more MP150 Systems in a local area network (LAN).Use any PC in the LAN to record from any MP150 System in the LAN.Device specific specs MP150Max Sample RateMP Internal Memory: 200K samples/sec (400K aggregate)PC Memory/Disk:200K samples/sec (400K aggregate)Internal Buffer Size:6M samplesSerial Interface Type/Rate: Ethernet: DLC type II (10M bits/sec)Transmission Type: Ethernet (10/100 Base T)Maximum Cable Length: 100 meters (Ethernet cable)Power Requirements: 12VDC @ 2 amp (uses AC150A)Dimensions:10cm x 11cm x 19cmWeight:1.0 kgCompatibilityEthernet InterfaceMac: System 8.6 or betterPC: Windows 98, 98SE, 2000, NT 4.0Includes:MP150ACE AC150A ETHSW1UIM100C CBLETH1 (2) ACKv3.7 for PC (Windows) or MacintoshRecommended configuration: MP150 System and local network connected to the computer’s Ethernet port via the ETHSW1 EthernetSwitch. This configuration provides optimal performance when connecting both an MP150 System and a network to the computer. In caseswhere the computer has no Ethernet port, an industry standard PCI Ethernet card or adapter is required.• MP150WSW for PC• MP150WS for MacintoshAcqKnowledge Software & Site Licenses for MP SystemsOne copy of AcqKnowledge software is included with each MP Starter System. The software can be used with other programs and includes extensiveon-screen help. The Site License program permits the purchase of a Site License for a specified number of software copies. Each Site Licenseincludes one software operations manual and software media. Purchase of a BIOPAC Site License does not obviate the requirement to purchasethe appropriate software package for each computer on which BIOPAC hardware is installed. For network installations, the relevant number ofcopies required is the number of machines upon which the software will be used. The Site License program is for educational institutions only andis subject for qualification. Contact BIOPAC for full details. For the part number, add the upper quantity you require to the software type, e.g.,ACK100M-9 for a 2-9 software Site License for use on Macintosh computers.AcqKnowledge Software—If purchased separately• ACK100W (PC running Windows)• ACK100M (Macintosh)Current Shipping Version for Macintosh Users: 3.2.7Version 3.7 will be available 2nd Quarter, 2001.Site LicensesQuantity ACK100W or AdditionalACK100M manuals (each)• 2-9• 10-24• 25-99• 100-249Software SpecificationsOperational accuracy: 20 digit double precision realStorage accuracy:16 digit double precision realStorage formats:AcqKnowledge, text (ASCII), PICT(Macintosh), WMF (Windows)Digital filters:Post-processing mode — FIR or IIR based,Real-time mode — IIR basedWindow functions:Rectangular, Bartlett, Hamming, Hanning,Kaiser-BesselMaximum file length: Limited only by available spaceMaximum number ofchannels displayed: 60Memory requirements: 64 MB RAM recommended minimumSystem requirements: PC: Windows 98, 98SE, 2000 Workstation,NT4.0 WorkstationMac: System 8.6 or betterUse the AcqKnowledge software to analyze and display data recordedfrom third-party data acquisition products. Open the data in a Text format,set the horizontal axis to the desired units and analyze your results.