Software for the synchronization of axes - Kollmorgen
Software for the synchronization of axes - Kollmorgen
Software for the synchronization of axes - Kollmorgen
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
SOCAPEL SA SOFTWARE FOR SYNCHRONIZATION OF AXES 024.8068.A2.3 PARAMETER MEMORYChapter 3.3 <strong>of</strong> this manual defines <strong>the</strong> notion <strong>of</strong> "parameter" in general, and <strong>the</strong> notion <strong>of</strong>"user's initial values" in particular. In <strong>the</strong> standard version, parameters are stored in anelectrically erasable/programmable memory (EEPROM type XICOR X2804 or X2864 orequivalent). For <strong>the</strong> downloaded-s<strong>of</strong>tware version, only a XICOR X2804 EEPROM (orequivalent)may be used.As <strong>for</strong> <strong>the</strong> program memory, <strong>the</strong> parameter memory is mounted in a socket. The sameprecautions should be taken in case <strong>of</strong> any exchange. Figure 2.1 shows <strong>the</strong> location andpositioning <strong>of</strong> this memory, and <strong>the</strong> correct insertion method <strong>for</strong> memories fitted with 24 or 28pins :- 28 pins : X2864 or X28256 EEPROM (standard),- 24 pins : X2804 EEPROM (exceptions).Positioning <strong>of</strong> mini-bridge S3 and S5 depends on <strong>the</strong> memory type, as shown in Figure 2.1.11
Change language