scsi interface specification - Plasmon

DRIVE COMMAND SET ACCESS EVENT LOG (ECH)PAGECODEVALUE(HEX)CAN BECLEARED(1) Field values in these logs are circumstance-dependent. Interpretation of this data is intendedfor Plasmon LMS internal use.Table 7. Page Code Definition (6000 Log Mode)LOG RETURNED0 Yes Return Logs 0-A (18,336 Bytes)1 No Drive Statistics Log (100 Bytes)2 Yes Seek Statistics Log (32 Bytes) (1)3 Yes Shuttle, Motor and Baseplate Statistics Log (80 Bytes) (1)4 Yes DPC Statistics Log (192 Bytes) (1)5 Yes Write Statistics Log Side A (220 Bytes) (1)6 Yes Write Statistics Log Side B (220 Bytes) (1)7 Yes Read Statistics Log Side A (420 Bytes) (1)8 Yes Read Statistics Log Side B (420 Bytes) (1)9 No SCSI Activity Log (266 Bytes) (1)A Yes System Event Log (16,386 Bytes) (1)B No Failure Analysis Log (1566 Bytes) (1)C No Media Management Log (372 Bytes)D No Media Specific Disk Information (SDI) Side A Log (1024 Bytes)E No Media Specific Disk Information (SDI) Side B Log (1024 Bytes)F No Media Product Specific Information (PSI) Log (256 Bytes)Table 8. Event Log HeaderBYTE DESCRIPTION0 Reserved1 Reserved2 Log Length (MSB)3 Log Length (LSB)PLASMON L M S - LD 6100/LF 6600/LF 6602 SCSI INTERFACE SPECIFICATIONPage 30