scsi interface specification - Plasmon

DRIVE COMMAND SET READ SECTOR LOCATION (E6H)READ SECTOR LOCATION (E6H)This command will provide the location of a sector in three formats. The formats provided are:• Logical Block Address (LBA)• Physical Block Address (PBA)• Track Sector Address (TSA)In addition, the side and zone of each sector will be provided.The sector location input can also be in the three formats addressed above.READ SECTOR LOCATION Command (E6H)BITBYTE7 6 5 4 3 2 1 0SideThe Side bit is only used if Input Form is track/sector. Side indicates which side the sector location is on.Media side A is zero and media side B is 1.Input Form00 Read Sector Location Command (E6H)01 LUN 0 Reserved Side Input Form02 Location Field03 Location Field04 Location Field05 Location Field06 Reserved07 Reserved08 Reserved09 ReservedInput Form tells the LaserDrive which form the location field is in.VALUEFORM0 SCSI Logical Block Address (LBA)1 Media Physical Block Address (PBA)2 Media Track/Sector Address (TSA)PLASMON L M S - LD 6100/LF 6600/LF 6602 SCSI INTERFACE SPECIFICATIONPage 92