scsi interface specification - Plasmon

More documents

Recommendations

Info

MODE SELECT (15H) 68READ-WRITE ERROR RECOVERY PAGE 70DEVICE DISCONNECT/RECONNECT PARAMETERS 71VENDOR-UNIQUE PARAMETERS 72LASERFILE MEDIA STATUS PAGE(LF 6600/LF 6602 ONLY) 75MODE SENSE (1AH) 76MODE SENSE DATA 77MODE SENSE PAGES 78CURRENT VALUES 82CHANGEABLE VALUES 82DEFAULT VALUES 82SAVED VALUES 82MOVE MEDIA (02H - LF 6600/LF 6602 ONLY) 83PARK BASEPLATES (C9H) 84PREVENT/ALLOW MEDIA REMOVAL (1EH) 84READ (28H - 10 BYTE) 86READ BUFFER (3CH - 10 BYTE) 87READ CAPACITY (25H) 88READ DIAGNOSTIC LONG (E8H) 89READ DIAGNOSTIC PHYSICAL (E9H) 91READ SECTOR LOCATION (E6H) 92RELEASE (17H) 95REQUEST SENSE (03H) 96RESERVE (16H) 111REZERO UNIT (01H) 112SEEK (10 BYTE) 113SEND DIAGNOSTIC (1DH) 114START/STOP UNIT (1BH) 116TEST UNIT READY (00H) 117VERIFY (2FH) 118WRITE (2AH - 10 BYTE) 119WRITE AND VERIFY (2EH) 121WRITE BUFFER (3BH) 122WRITE BUFFER - DIAGNOSTICS 122WRITE BUFFER - DOWNLOAD OPERATION 123WRITE BUFFER DOWNLOAD PROCEDURE 125GLOSSARY 129
SCOPESCOPEThis document describes the physical and functional characteristics of the Small Computer SystemInterface (SCSI) for the LaserDrive (LD) 6100, the LaserFile (LF) 6600 RapidChanger and the LF 6602RapidChanger. The specification is provided for users, system integrators and managers of informationsystems.NOTEThe word "LaserDrive", as used in this document, refers to theLD 6100, LF 6600 and the LF 6602. If a feature applies specifically tothe LD 6100, LF 6600 or LF 6602, then the appropriate model numberis used.The LD 6100 is a single-cartridge optical disk drive; the LF 6600 RapidChanger is an optical disk drive withan integral six-cartridge shuttle; the LF 6602 consists of two LF 6600 drives enclosed in a cabinet.The LaserDrive is a write once, read many times (WORM) device used for long-term storage of data. Ithas a user storage capacity of 12 GBytes per double-sided cartridge. Comprehensive error correction andrecovery capabilities are incorporated for maintaining data integrity. Media management, including errorrecovery, is transparent to the host.The LaserDrive's integrated controller interfaces with other SCSI devices and a host system via SCSI.RELATED PUBLICATIONSThe following Plasmon LMS publications pertain to this document:LM 6000 Media Product Specification 97647044LD 6100/LF 6600/LF 6602 Product Specification 97653977LD 6100 Hardware Maintenance Manual 97653979LF 6600/LF 6602 Hardware Maintenance Manual 97653980LD 6100 User Manual 97654437LF 6600 User Manual 97653976LF 6602 User Manual 97654438External reference cited in this specification:American National Standards Institute (ANSI) -Small Computer Systems Interface (SCSI-2) Specification X3.131- 1994American National Standards Institute, New York, NY97653978 HPage 5
Page 1 and 2: THE PLASMON INFINITYLD 6100 LASERDR
Page 3: TABLE OF CONTENTSSCOPE 5RELATED PUB
Page 7 and 8: GENERAL DESCRIPTIONGENERAL DESCRIPT
Page 9 and 10: LASER-DRIVE SCSI CHARACTERISTICSCOM
Page 11 and 12: LASER-DRIVE SCSI CHARACTERISTICSMES
Page 19 and 20: SCSI COMMANDS AND STATUSCOMMAND IMP
Page 21 and 22: SCSI COMMANDS AND STATUSCOMMAND DES
Page 23 and 24: SCSI COMMANDS AND STATUSSTATUSSTATU
Page 25 and 26: SCSI COMMANDS AND STATUSCOMMAND PRO
Page 27 and 28: DRIVE COMMAND SETDRIVE COMMAND SETT
Page 29 and 30: DRIVE COMMAND SETACCESS EVENT LOG (
Page 55 and 56:
DRIVE COMMAND SETACCESS EVENT LOG (
Page 57 and 58:
Page 59 and 60:
Page 61 and 62:
Page 63 and 64:
DRIVE COMMAND SETINQUIRY (12H)Table
Page 65 and 66:
DRIVE COMMAND SETMEDIA SCAN (38H)ME
Page 67 and 68:
DRIVE COMMAND SETMEDIA SCAN (38H)Th
Page 69 and 70:
DRIVE COMMAND SETMODE SELECT (15H)T
Page 71 and 72:
DRIVE COMMAND SETMODE SELECT (15H)T
Page 73 and 74:
DRIVE COMMAND SETMODE SELECT (15H)W
Page 75 and 76:
DRIVE COMMAND SETMODE SELECT (15H)S
Page 77 and 78:
DRIVE COMMAND SETMODE SENSE (1AH)Al
Page 79 and 80:
DRIVE COMMAND SETMODE SENSE (1AH)De
Page 81 and 82:
DRIVE COMMAND SETMODE SENSE (1AH)LA
Page 83 and 84:
DRIVE COMMAND SETMOVE MEDIA (02H -
Page 85 and 86:
DRIVE COMMAND SETPREVENT/ALLOW MEDI
Page 87 and 88:
DRIVE COMMAND SETREAD BUFFER (3CH -
Page 89 and 90:
DRIVE COMMAND SETREAD DIAGNOSTIC LO
Page 91 and 92:
DRIVE COMMAND SETREAD DIAGNOSTIC PH
Page 93 and 94:
DRIVE COMMAND SETREAD SECTOR LOCATI
Page 95 and 96:
DRIVE COMMAND SETRELEASE (17H)RELEA
Page 97 and 98:
DRIVE COMMAND SETREQUEST SENSE (03H
Page 99 and 100:
Page 101 and 102:
Page 103 and 104:
Page 105 and 106:
Page 107 and 108:
Page 109 and 110:
Page 111 and 112:
DRIVE COMMAND SETRESERVE (16H)RESER
Page 113 and 114:
DRIVE COMMAND SETSEEK (10 BYTE)SEEK
Page 115 and 116:
DRIVE COMMAND SETSEND DIAGNOSTIC (1
Page 117 and 118:
DRIVE COMMAND SETTEST UNIT READY (0
Page 119 and 120:
DRIVE COMMAND SETWRITE (2AH - 10 BY
Page 121 and 122:
DRIVE COMMAND SETWRITE AND VERIFY (
Page 123 and 124:
DRIVE COMMAND SETWRITE BUFFER (3BH)
Page 125 and 126:
Page 127 and 128:
Page 129 and 130:
GLOSSARYGLOSSARYThe glossary includ
Page 131 and 132:
GLOSSARYLD 6100LEDLF 6600LF 6602Log
show all

scsi interface specification - Plasmon

Create successful ePaper yourself

Delete template?

Save as template?