BaseStation 3200 User Manual - Baseline Systems

C h a p t e r 5 – R e f e r e n c eEven DaysThis day interval mode will allow programs tostart on even days of the month.Odd DaysThis day interval mode will allow programs tostart on odd days of the month.Odd Days and Skip 31 stThis day interval mode will allow programs to start on odd days of the month, but will also notallow watering on the 31 st of the month, thus maintain a better every two day schedule whencrossing to a new month.Soak CyclePlease see a previous section for thisinformation. Refer to page 36, Using Soak cycles.MV/Pump StartThis dial position can be used to assign mastervalves to the corresponding mainline, and to alsoassign programs to the appropriate mainline.This screen shown to the right is nearly a duplicate of the mainline configure screen in the FlowMenu dial position. Normally closed master valves have a vale decoder assigned to them in thebiCoder menu dial position, and then they are assigned to a mainline in this screen. NormallyOpen Master Valves (shown in MV1 in this sample screen) are based on the flow device number(#1 in this case). For additional information, refer to page 48, Multiple Flow Devices andMainlines.Page 62Baseline 3200