BaseStation 3200 User Manual - Baseline Systems

C h a p t e r 5 – R e f e r e n c eAUX – BudgetProgram watering budgets are included only forcompleteness and are not recommended foruse. This screen allows the water times of allzones on each of the twenty programs to beadjusted up and down, between 25% and 200%of the zone water time programmed from thezone run times dial position.A better watering strategy is to water deep (atleast ½” of water) and then water less often –see the discussion on Historical ET Calendarwatering on page 38.AUX – SystemThis menu provides two functions: changing the controller serial number and then a set ofsystem functions that should only be done under direction of Baseline support.The temperature in the lower right corner is theinternal temperature of the controller. Changing the controllerserial number will keepyou from doing a restorefrom a previous backupoperation(if the controllerhad a different serialnumber).Self-TestThis dial position provides a set of diagnostic andself-test operations that are helpful to verifycorrect operation and to help diagnose problemswhen they arise.There are four functions, the first two of which are sub-menus and will open screens withadditional information. Highlight the decired function and press ENTR to open the next screen,or to execture the function (see below for more information).Page 68Baseline 3200