BaseStation 3200 User Manual - Baseline Systems

C h a p t e r 5 – R e f e r e n c eAUX – Rain/OffThis function will stop all water for a specifiednumber of days. Setting the days to one, willstop watering for the rest of the day, and willresume normal watering at midnight.The number of delay days may be set between 1and 365. Use the + and – keys to set the numberof days to delay watering.Once a Rain/Off stop watering is active, it may becleared by entering this menu and setting thenumber of days to zero, or by viewing thepause/stop status from the main screen (dial inthe Auto/Run position) and pressing the CLR key. Please refer to page 56, Pause Status Screen.AUX – Temp/PauseThis menu will display the presence of an air temperature sensor if one is connected to the twowire.This screen has a search function to find two-wire devices. To remove a two-wiredevice, you must physicallydiconnect it from the twowireand then perform aSearch operation from thedevice specific menu. Thismeans a biSensor can onlybe removed by doing asearch from the biSensormenu, etc..AUX – PasscodesThe BaseStation 3200 has two levels of access forBaseManager central control access: read-onlyand read-write access. These are set in thePasscodes screen in the AUX dial position.When the first menu item is highlighted, it can bechanged bewteen Read/Write and Read Only byuse the + or – keys. Use the NEXT/PREV keys tomove between the digits of the passcode andthenh modify them to form your own uniqueaccess codes.This setp is not needed if the controller will beused totally standalone and will not be accessed from the BaseManager central control software.It is important that the codes be changed from their default values to allow access to thoseauthorized and to restrict further those able to make programming changes.Page 66Baseline 3200