Printrex 980 Operator's Guide - TransAct

How to Operate the Printrex ® 980 PrinterShipping the PrinterWhen transporting printer over a long distance, observe the followingprocedures:Contact Printrex technical support for advice before you ship the printer along distance or move the printer via car, truck or airplane. Moving theprinter without proper preparation could subject it to shock and vibration,which could damage the printer and/or cause a fire.Before transporting the printer, be sure to drain the printer of ink. If inktanks are removed before draining the printer of ink, ink leaks from theneedle sections in the ink tank slots could stain your clothes andsurrounding work areas.The printer weighs about 123 pounds (57kg). Three persons are alwaysrequired to move the printer. When lifting and moving the printer, theyshould hold the handles at the bottom so that they do not injurethemselves. If they hold other parts of the printer, the printer can bedamaged and/or it can drop and injure people.Note: Do not move the printer with the upper unit, ink tank door, ormaintenance cartridge door open. This can damage the printer.100-11672 - Rev D Page 109