Printrex 980 Operator's Guide - TransAct

Step-by-Step Installation InstructionsAction of Relocating PrinterThe Printer is filled with ink in its Ink Supply System, Imaging System andelsewhere. Implement items suggested below thoroughly and explain tocustomers fully to prevent ink spills in or outside Printer or to avoidunexpected failures when Printer is transported.Caution:Do not incline Printer more than 15° degrees during relocation.Relocating from One Place to Another on Same Floor or in Same BuildingPrinter required to drain (suction) remaining ink in Purge Unit before movingPrinter on the same floor or in the same building. Ink drainage is performedwith service utility .Ink drainage procedure1) Connect PC to Printer, and then start service utility.2) Open the [Cleaning,User Setting] tab, and then click [Moving the printer].Page 86100-11672 - Rev D