Printrex 980 Operator's Guide - TransAct

Appendix A: Ordering Genuine Ithaca Supplies2) Click [Print] to print the TK-GAP adjustment pattern.Examining and Adjusting TK-GAP1) Observe the TK-GAP Adjustment Pattern and examine if the TK-GAPadjustment is necessary for Print Modules according to the following. Performthe adjustment, if necessary.Find where the paper perforation is located on the TK-GAP adjustmentpattern scale.If the paper perforation is at the “+2” position on the TK-GAP adjustmentpattern scale, the adjustment value is “+2”.100-11672 - Rev D Page 155