Printrex 980 Operator's Guide - TransAct

Appendix B: Frequently Asked QuestionsExamining and Adjusting Printhead Position1) Module-to-Module AdjustmentThis adjustment is to align the relative print positions of 2 Print Modules toeach other.The relative print positions in the feeding direction can be examined in the"KV" scale.For the example shown in the figure, the 2 elements are in line at "+2". Thus,the adjustment value is "+2".The relative print positions in the cross-feeding direction can be examined inthe "KH" scale. For the example shown in the figure, the 2 elements are in lineat "+2". The adjustment value is therefore "+2".Page 166100-11672 - Rev D