Printrex 980 Operator's Guide - TransAct

Appendix B: Frequently Asked QuestionsExamining and Adjusting Printhead Position:1) Module-to-Module AdjustmentThis adjustment is to align the relative print positions of 2 Print Modules toeach other. The relative print positions in the feeding direction can beexamined in the "KV" scale. For example shown in the figure, the 2 elementsare in line at "+2". Thus, the adjustment value is "+2".The relative print positions in the cross-feeding direction can be examined inthe "KH" scale. For the example shown in the figure, the 2 elements are in lineat "+2". The adjustment value is therefore "+2".2) Head Position AdjustmentThis adjustment is to align the relative color registrations in all the printheads.The relative color registrations in the feeding direction can be examined in the"xxV" scale and the ones in the cross-feeding direction can be examined in the"xxH" scale.Page 238100-11672 - Rev D