Printrex 980 Operator's Guide - TransAct

Appendix A: Ordering Genuine Ithaca SuppliesWarning"Warning" refers to indication of occurrence of a condition that does not affectprinting directly but requires some action to be taken. An error message anddetails on the warning are displayed on the "Printer Status" screen on the PC'smonitor. Printing can be performed normally. However, an operator call canresult if the printer is used continuously without correcting the error.The following table summarizes the error messages and corrective actions.Code Detail Code Item Description01: Remaining Ink Warning01 01 Condition Ink running out soon.DetectedAction04: Maintenance Cartridge Warning04 01 ConditionDetectedAction06: Purge Unit Replacement (*Remarks)06 01 ConditionDetectedActionRemarks07: Blade Cleaner Replacement (*Remarks)07 01 ConditionDetectedRemarks08: Paper Near End08 01 ConditionDetected1. Replace with a new Ink Tank.2. Close all doors (warning cleared)Maintenance Cartridge soon full.1. Replace with a new MaintenanceCartridge.2. Close all doors (warning cleared).The time has come to replace the PurgeUnit.1. Replace Purge Unit.2. Restart Printer after replacing PurgeUnit (warningcleared)."Purge Unit Replacement" is issued in advance, if "PurgeUnit Replacement" is expected within 1 month when"Blade Cleaner Replacement" is issued.The time has come to replace the BladeCleaner.Action 1. Replace Blade Cleaner.2. Restart Printer after replacing BladeCleaner (warningcleared)."Blade Cleaner Replacement" is issued in advance, if"Blade Cleaner Replacement" is expected within 1 monthwhen "Purge Unit Replacement" is issued.ActionPaper running out soon.Load new paper.100-11672 - Rev D Page 213