Printrex 980 Operator's Guide - TransAct

Appendix B: Frequently Asked QuestionsCode Detail Code Item Description21: Ink Tank Installation Error21 01-FF Condition Ink tank is not installed correctly.(Additionalvalueof K:01,C:02,M:04,Y:08)(MODULE1),(Additionalvalueof K:10,C:20,M:40,Y:80)(MODULE2)DetectedAction22: Ink Tank Data Error22 01-FF(Additionalvalueof K:01,C:02,M:04,Y:08)(MODULE1),(Additionalvalueof K:10,C:20,M:40,Y:80)(MODULE2)ConditionDetectedAction23: Maintenance Cartridge Full23 01 ConditionDetected1. Install Ink Tank again, or replace with a newInk Tank.2. Close all doors (error cleared).Ink tank data error.1. Install a new Ink Tank.2. Close all doors (error cleared).Maintenance Cartridge is detected full byLeakage Sensor.Action 1. Replace with a new Maintenance Cartridge.2. Close all doors (error cleared).24: Maintenance Cartridge Installation Error24 01 Condition Maintenance cartridge is not installed correctly.DetectedAction 1. Install Maintenance Cartridge again orreplace with a new Maintenance Cartridge.2. Close all doors (error cleared).25: Maintenance Cartridge Data Error25 01 ConditionDetected26: Ink Tank ID Error26 01-FF(Additionalvalue ofK:01,C:02,M:04,Y:08)(MODULE1),(Additionalvalueof K:10,C:20,ActionConditionDetectedActionPaper length is smaller than loaded print data.1. Replace with a new Maintenance Cartridge.2. Close all doors (error cleared).Correct Ink Tank is not installed.1. Replace with a correct Ink Tank.2. Close all doors (error cleared).Page 210100-11672 - Rev D