Printrex 980 Operator's Guide - TransAct

Step-by-Step Installation InstructionsInitial Loading of Ink1) Connect the included Power Cord to the printer.2) Connect Power Cord to the outlet.3) Turn on Main Power Switch. Initial ink loading starts automatically whenMain Power Switch is turned on. About 25 minutes are required for initial inkloading. When initial ink loading is completed, the STATUS lamp lights and notblinking. Make sure that the STATUS lamp lights before proceeding to the nextstep.Caution: Do not turn off Main Power Switch during ink loading. If Main Power Switch is turned off during ink loading, Printer stops inkloading. In such a case, turn on Main Power Switch to start ink loadingagain. Restarting the ink loading causes extra waste-ink. Ink loading time might be changed due to the design change.Page 30100-11672 - Rev D