CLP-170 CLP-150 - Yamaha

More documents

Recommendations

Info

Message List (CLP-170) (CLP-170) 100 CLP-170/150 Message Meaning 1. This message will appear if a problem is found with the song data when you select a song or while the song is playing. In this case, reselect the song, and try once again to play it back. If the message still appears, the song data may have been damaged. 2. This message will appear if a different “CharacterCode” (page 54) is selected than when you assigned the song name. In this case, switch the “CharacterCode”, re-select the song, and play back. 1. This message will be displayed if current memory fills up during recording. Recording will stop automatically at this point. The data that had been recorded up to that point will remain. This message will also be displayed when you attempt to enter Record mode for additional recording if that song already occupies all of current memory. In this case, additional recording will not be possible. If there is an already-recorded track that you do not need to keep, you can use “ChannelClear” (page 74) to delete the unneeded track, so that you will then be able to record the equivalent amount of additional material. 2. This message will be displayed when you select a song if that song is larger than the capacity of the current memory (page 102). This song cannot be loaded into the CLP-170/150, and cannot be played back. Please select a different song. This message will be displayed when you edit a song if that song is larger than the capacity of the current memory (page 102). This song cannot be edited on the CLP-170/150. This message prompts you to start the operation. To start, press the B [+ (YES)] button. Press the [EXIT] button to cancel the operation. This message prompts you to confirm the execution. Press the B [+ (YES)] button to continue. Press the B [– (NO)] button to cancel. You tried to perform a file- or disk-related operation using an unformatted disk. Eject the disk, format it using the “FormatDisk” parameter (page 53), and try again. You tried to perform a file- or disk-related operation using an unformatted disk. To cancel the operation, press the B [– (NO)] button. To format the disk and try again, press the B [+ (YES)] button to display the “FormatDisk” parameter (page 53).
(CLP-170) Message Meaning Message List This message means that the Clavinova was unable to transmit voice bulk data. If this message appears, make sure that the power of your computer is not turned off, that the cable is connected correctly, that the HOST SELECT switch is set correctly, and that the driver on your computer is functioning correctly. Then try transmitting the data once again. You tried to copy data to a different type of disk (e.x.: 2DD→2HD, 2HD→2DD) during the CopyDisk operation (page 52). Eject the disk and insert an appropriate disk. You used a period or space at the beginning of a song name or you tried to change a song name that includes a character (or characters) not supported by the CLP-170/150, and the CLP-170/150 could not process the name. The Clavinova displays the previous screen in three seconds. Rename the song correctly. CLP-170/150 101
Page 1 and 2:
CLP-170/CLP-150 CLP-170 CLP-150 Own
Page 3 and 4:
WARNING PRECAUTIONS PLEASE READ CAR
Page 7 and 8:
Table of contents Changing a voice
Page 9 and 10:
Table of contents Pitch bend range
Page 11 and 12:
Settings Application Index Making d
Page 13 and 14:
• To protect your data (Write-pro
Page 15:
The Clavinova includes 50 preset so
Page 19 and 20:
Basic Operation CLP-170/150 19
Page 22 and 23:
Listening to the Demonstration Tune
Page 24 and 25:
Listening to 50 Piano Preset Songs
Page 26 and 27:
Listening to 50 Piano Preset Songs
Page 28 and 29:
Selecting and Playing Voices 28 CLP
Page 30 and 31:
Selecting and Playing Voices 30 CLP
Page 33 and 34:
Combining two voices (Dual mode) Se
Page 35 and 36:
Selecting and Playing Voices Splitt
Page 37 and 38:
Using the metronome Selecting and P
Page 39 and 40:
2. Select a voice. Select a voice (
Page 42 and 43:
Recording Your Performance 42 CLP-1
Page 45 and 46:
Recording Your Performance Adjustin
Page 47 and 48:
Basic file operation Saving Recorde
Page 49 and 50: Saving Recorded Songs and Handling
Page 51 and 52: Renaming a song...[RenameSong] Savi
Page 53 and 54: Saving Recorded Songs and Handling
Page 55 and 56: Playing Back Recorded Songs and Com
Page 57: 5. Return to the main screen. Press
Page 60: Connections 60 CLP-170/150 6 AUX IN
Page 65 and 66: Connections 3. Connecting the USB p
Page 67 and 68: Detailed Settings CLP-170/150 67
Page 69 and 70: Voices [VOICE SETTING] In Dual mode
Page 71 and 72: Making detailed settings MIN MAX NE
Page 73 and 74: Detailed settings for recording and
Page 75 and 76: TIP Use the following buttons to sp
Page 77 and 78: Detailed settings for the voices [V
Page 79 and 80: Selecting the reverb type [ReverbTy
Page 81 and 82: Turning the vibraphone vibrato effe
Page 83 and 84: Setting the touch sensitivity [Touc
Page 85 and 86: Detailed settings for iAFC [iAFC SE
Page 87 and 88: MIDI [MIDI SETTING] You can make de
Page 89 and 90: Setting Local control on/off [Local
Page 91 and 92: Other settings You can make detaile
Page 93 and 94: Setting range: -12 (-1 octave)-0 (n
Page 95 and 96: Switch the speaker on/off [Speaker]
Page 97 and 98: (CLP-170) Message Meaning Message L
Page 99: (CLP-170) Message Meaning Message L
Page 103 and 104: ■ I cannot change the key signatu
Page 105 and 106: Appendix CLP-170/150 105
Page 107: Data Compatibility This section cov
Page 110 and 111: Preset Voice List Voice group Voice
Page 112 and 113: CLP-150: Keyboard Stand Assembly CA
Page 114 and 115: CLP-150: Keyboard Stand Assembly 7.
Page 116 and 117: CLP-170: Keyboard Stand Assembly 2.
Page 119 and 120: N New Song 38 Normal setting* 30 O
Page 121 and 122: IMPORTANT SAFETY INSTRUCTIONS INFOR
Page 123 and 124: For details of products, please con
show all

CLP-170 CLP-150 - Yamaha

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?